IKEA BJÖRKÅN 094.158.73 Sink instructions manual

The IKEA BJÖRKÅN 094.158.73 is a stainless steel single-bowl kitchen sink designed for durability and easy cleaning. It features a standard single drain hole, a brushed satin finish to resist scratches and water spots, and is compatible with most standard faucets and accessories. Below are key sections for safety, features, installation, setup, operation, care, and troubleshooting.

1. Features at a Glance 2. Installation Requirements 3. Installation Steps 4. Specifications 5. Mounting and Sealing 6. Connecting Plumbing 7. Daily Use & Maintenance 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Stainless steel bowl, Mounting clips, Silicone sealant, Drain assembly, Overflow opening.

Feature	Description
Material	18-gauge stainless steel, brushed satin finish
Bowl Configuration	Single bowl, right-hand drain
Dimensions	Standard size for most countertop cutouts
Mounting Type	Undermount or drop-in (depending on model)
Drain Hole	Standard 3.5-inch diameter
Overflow	Integrated overflow opening
Sound Dampening	Undercoating to reduce noise
Compatibility	Works with most IKEA and standard faucets
Accessories Included	Mounting clips, template (if applicable)
Weight Capacity	Designed for typical kitchen use

Installation Requirements

Before installation, ensure you have the correct tools and a suitable countertop.

Tools Needed: Silicone sealant gun, screwdriver, wrench, tape measure, pencil, jigsaw (for countertop cutout if not pre-cut).
Countertop: Must be level, clean, dry, and able to support the sink's weight. Verify the cutout dimensions match the sink template.
Plumbing: Ensure drain pipes and water supply lines are accessible and compatible.
Safety Gear: Wear gloves and safety glasses during installation.

WARNING! The sink is heavy and has sharp edges; lift with care and use proper support to avoid injury.

Installation Steps

Follow these steps for a secure and leak-free installation.

Prepare the Countertop: Clean the installation area thoroughly. If needed, use the provided template to mark and cut the opening.
Dry Fit the Sink: Place the sink into the cutout without sealant to ensure proper fit and alignment.
Apply Sealant: Run a continuous bead of 100% silicone sealant along the underside of the sink's rim.
Mount the Sink: Carefully lower the sink into the cutout. From underneath, attach and tighten the mounting clips evenly around the perimeter.
Clean Excess Sealant: Wipe away any squeezed-out sealant with a damp cloth before it cures.
Let Sealant Cure: Allow the silicone to cure fully (refer to sealant instructions, typically 24 hours) before connecting plumbing or using the sink.

CAUTION! Do not overtighten mounting clips, as this can warp the sink. Ensure the sink is level before the sealant sets.

Specifications

Model Number: BJÖRKÅN 094.158.73
Material: 18-gauge Stainless Steel (AISI 304)
Finish: Brushed Satin
Bowl Depth: Standard depth (e.g., 8 inches)
Overall Dimensions: [Insert exact width x length dimensions]
Cutout Dimensions: [Insert required countertop cutout dimensions]
Weight: [Insert approximate weight]
Drain Opening: 3.5 inches
Mounting: Undermount (or Drop-in, specify based on product)
Warranty: Limited warranty as per IKEA terms.

Mounting and Sealing

Proper sealing is critical to prevent water damage to the cabinet below.

Sealant Type: Use only 100% silicone sealant suitable for kitchens and bathrooms. Do not use acrylic or adhesive caulk.

Mounting Clips: Space clips evenly (approx. every 6-8 inches). Tighten screws gradually and alternately to apply even pressure.

Check for Gaps: After mounting, inspect the entire seam between the sink and countertop. There should be no visible gaps. Apply additional sealant if necessary.

Connecting Plumbing

Connect the drain and faucet after the sink is securely mounted and the sealant is cured.

Install the Drain Assembly: Apply plumber's putty or silicone gasket to the drain flange. Insert from the top and tighten the locknut from below.
Connect the P-Trap: Attach the tailpiece to the drain, then connect the P-trap to the tailpiece and the wall drain pipe.
Install the Faucet: Follow the faucet manufacturer's instructions. Typically, insert the faucet through the mounting hole(s), secure from below with provided hardware, and connect the water supply lines.
Check for Leaks: Slowly turn on the water supply. Check all connections (faucet, drain, P-trap) for leaks. Tighten connections if needed.

Tip: Hand-tighten connections first, then use a wrench for a final quarter-turn. Overtightening can damage fittings.

Daily Use & Maintenance

Designed for standard kitchen tasks like washing dishes, preparing food, and cleaning.

Normal Use: The stainless steel is resistant to stains and heat. Avoid dropping heavy, sharp objects.
Preventing Scratches: Use a sink grid or mat to protect the bottom from pots and pans.
Unclogging Drain: Use a plunger or a drain snake. Avoid harsh chemical drain cleaners which can damage the finish and pipes.
Overflow Function: The overflow opening prevents overfilling. Keep it clear of debris.

WARNING! Do not cut or chop directly on the sink surface. Do not pour boiling liquids directly down the drain if you have PVC pipes.

Safety Information

Read all instructions before installation and use.

This sink is for indoor residential use only.
Ensure the countertop and cabinets can support the total weight of the sink, water, and contents.
Keep children away from installation area and tools.
Sharp edges may be present; handle with care.

Care & Cleaning

Regular cleaning maintains appearance and hygiene.

Routine Cleaning: Wash with warm soapy water and a soft cloth or sponge. Rinse and dry with a soft towel to prevent water spots.

Stain Removal: For hard water stains or discoloration, use a paste of baking soda and water or a non-abrasive stainless steel cleaner. Always wipe in the direction of the grain (brush lines).

Avoid: Steel wool, scouring powders, bleach, or abrasive cleaners. They will scratch the finish. Do not use oven cleaner.

CAUTION! Do not use acidic cleaners (e.g., for lime scale) for prolonged periods. Rinse immediately after use.

Warranty & Support

This IKEA product is covered by a limited warranty. Proof of purchase (receipt) is required.

Warranty Coverage: Refer to the IKEA warranty booklet for specific terms and duration regarding material and manufacturing defects.

Non-Warranty: Damage from improper installation, accident, misuse, lack of maintenance, or normal wear and tear is not covered.

For assembly help, missing parts, or support: Visit the IKEA store where you made your purchase, go to www.ikea.com, or call IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Water leaking under sink	Loose drain connection or insufficient sealant	Tighten drain locknut. If leak is from sink rim, re-seal with silicone (may require removing sink).
Sink is loose or moves	Mounting clips not tight or improperly spaced	Tighten mounting clips evenly. Add more clips if necessary.
Scratches on surface	Abrasive cleaners or harsh scrubbing	Clean with grain using recommended cleaners. Deep scratches may require professional refinishing.
Slow draining	Clog in drain or P-trap	Remove P-trap and clean out debris. Use a drain snake if clog is deeper.
Water spots or discoloration	Hard water or mineral deposits	Clean with vinegar solution or commercial hard water stain remover. Rinse and dry thoroughly.
Dull finish	Build-up of soap film or grease	Clean with a degreasing dish soap or a dedicated stainless steel cleaner.

Note: For persistent installation or product issues, contact IKEA customer support for guidance.

Service: www.ikea.com or your local IKEA store.