IKEA BJURSTA 802.175.24 Table instructions manual

The IKEA BJURSTA 802.175.24 is an extendable dining table featuring a sturdy construction, a smooth extension mechanism, and a durable surface finish. Designed for everyday use, it combines functionality with a clean Scandinavian aesthetic. Below are key sections for safety, assembly, features, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Tools Required 4. Assembly Instructions 5. Specifications 6. Using the Extension Mechanism 7. Care & Maintenance 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: Table top, Underframe, Extension leaf, Legs, and all necessary hardware.

Feature	Description
Extendable design	Includes a removable extension leaf for flexible seating
Sturdy underframe	Provides stability and support for daily use
Durable surface	Scratch-resistant and easy to clean finish
Pre-drilled holes	For easy and accurate assembly
Adjustable feet	Allows for leveling on uneven floors
Compact storage	Extension leaf stores neatly under the table when not in use
Modern design	Clean lines and versatile style
Weight capacity	Designed to hold typical dining table loads

Package Contents

Unpack and verify all parts before starting assembly.

Table top (main section)
Extension leaf
Underframe (metal or wooden)
Legs (4 pieces)
Hardware pack (screws, bolts, cam locks, dowels)
Assembly tool (if included)
Instruction manual

WARNING! Check for damage upon unboxing. Contact IKEA customer service if any parts are missing or defective.

Tools Required

You may need the following tools (not included):

Phillips screwdriver
Allen key (hex key) - often provided
Hammer (for tapping dowels if needed)
Soft mallet
Clean cloth for surface protection

CAUTION! Use appropriate tools to avoid damaging parts or injuring yourself.

Assembly Instructions

Follow steps in order. Work on a soft, clean surface to prevent scratches.

Prepare the underframe: Attach legs to the underframe using provided bolts. Tighten securely but do not overtighten.
Attach underframe to table top: Place the underframe upside down on a protected surface. Position the table top (main section) upside down onto the underframe, aligning pre-drilled holes.
Secure table top: Insert and tighten screws through the underframe into the table top. Ensure all connections are firm.
Install extension mechanism: If not pre-installed, attach slides or supports for the extension leaf according to diagram.
Attach adjustable feet: Screw leveling feet into the bottom of each leg if provided.
Flip the table: Carefully turn the assembled table right-side up with assistance.
Insert extension leaf: Slide the extension leaf into its stored position under the table or attach it for use.

Tip: Two people are recommended for assembly, especially when flipping the table.

Specifications

Dimensions (closed): Length: 47 ¼" (120 cm), Width: 33 ½" (85 cm), Height: 29 ½" (75 cm).
Dimensions (extended): Length: 70 ⅞" (180 cm) with leaf inserted.
Material: Table top: Particleboard, Ash veneer. Underframe: Steel, Epoxy/polyester powder coating.
Weight: Approximately 55 lbs (25 kg).
Color: Black-Brown / Ash veneer.
Max load: 110 lbs (50 kg) evenly distributed.
Extension leaf: Stores underneath when not in use.

Using the Extension Mechanism

To extend the table for additional seating:

Pull the table ends apart gently. The table top will separate in the middle.
Retrieve the extension leaf from its storage position underneath.
Place the leaf into the gap between the two table halves, ensuring it sits flush.
Push the table halves together until they lock securely against the leaf.
To return to original size, reverse the process and store the leaf underneath.

WARNING! Do not force the mechanism. Ensure the leaf is properly seated to avoid instability.

Care & Maintenance

Clean with a damp cloth and mild detergent. Wipe dry immediately.

Daily cleaning: Use a soft, damp cloth. Avoid abrasive cleaners.
Stain removal: For stubborn stains, use a mild soap solution. Never use solvents.
Protection: Use coasters and placemats to prevent heat marks and scratches.
Wood care: The ash veneer may be lightly treated with furniture polish if desired.

CAUTION! Do not place hot items directly on the surface. Avoid prolonged moisture exposure.

Safety Information

Ensure safe use and prevent accidents.

Assemble on a soft surface to avoid damage.
Use two people for lifting and moving the table.
Do not exceed the maximum weight capacity.
Ensure the table is fully locked in both extended and closed positions before use.
Keep away from direct heat sources and excessive humidity.
Check tightness of screws periodically, especially after moving the table.

WARNING! Children should not climb or hang on the table. The extension mechanism should be operated by adults.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or warranty card for details.

For assembly help, missing parts, or product support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the IKEA Assembly Instructions app.

Model: BJURSTA 802.175.24. Article number: 802.175.24.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Table wobbles	Uneven floor or loose legs	Adjust leveling feet; tighten all leg bolts securely.
Extension leaf doesn't fit	Misaligned slides or debris	Check alignment of the table halves; clean slides; ensure leaf is oriented correctly.
Difficulty pulling table apart	Mechanism stiff or obstructed	Apply a small amount of furniture wax or dry lubricant to slides; check for obstructions.
Screws won't tighten	Stripped threads or misalignment	Ensure you are using the correct screw; check that parts are aligned before tightening.
Surface scratches	Abrasive cleaning or sharp objects	Use placemats and coasters; for minor scratches, use a matching furniture touch-up pen.

Note: For persistent issues, disassemble and reassemble the affected section, following the instructions carefully.

Support: www.ikea.com or your local IKEA customer service.