IKEA BJÖRKSNÄS 304.073.57 Nightstand instructions manual

The IKEA BJÖRKSNÄS 304.073.57 is a solid wood nightstand featuring a classic design with clean lines, a drawer for storage, and a durable finish. It requires assembly and includes all necessary hardware. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Care & Maintenance 5. Product Specifications 6. Troubleshooting 7. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Nightstand top, sides, back panel, drawer front, drawer sides, drawer bottom, drawer runner system, and hardware pack.

Part DescriptionQuantityImage Reference
Nightstand Top (Solid Wood)1A
Side Panel (Left & Right)2B
Back Panel1C
Drawer Front1D
Drawer Sides2E
Drawer Bottom1F
Drawer Runner Set1 pairG
Cam Lock Nuts6H
Screws (Various sizes)12I
Wooden Dowels8J

Safety Information

Read all instructions before assembly. Ensure a clean, spacious work area.

  1. Keep small children and pets away during assembly to prevent choking hazards.
  2. Use provided tools only; do not overtighten screws.
  3. Assemble on a soft surface (e.g., carpet) to avoid scratching parts.
  4. Check all connections are secure before use.

WARNING! Furniture can tip over. Secure to wall using included anti-tip device if applicable, especially in households with children. Do not stand or sit on the nightstand.

Assembly Instructions

Follow steps in order. Estimated assembly time: 30-45 minutes.

  1. Prepare Parts: Lay out all parts as shown in diagram. Identify each piece by letter.
  2. Attach Sides to Top: Insert wooden dowels (J) into pre-drilled holes on underside of Top (A). Align Side panels (B) and press firmly. Secure with cam lock nuts (H) using a screwdriver.
  3. Install Back Panel: Slide Back panel (C) into grooves on Side panels. Secure with provided screws (I).
  4. Assemble Drawer: Connect Drawer sides (E) to Drawer front (D) using dowels and cam locks. Insert Drawer bottom (F) into slots. Tap gently into place.
  5. Install Drawer Runners: Attach runner halves to inside of nightstand frame and to Drawer sides as per diagram. Ensure they slide smoothly.
  6. Final Check: Ensure all screws are tight but not stripped. Wipe away any dust. Place in desired location.

Tip: Do not fully tighten cam locks until all parts are aligned. Use a soft mallet to tap dowels if needed.

Care & Maintenance

CAUTION! Never use steel wool or harsh chemicals. Immediately wipe up spills.

Product Specifications

Troubleshooting

IssuePossible CauseCorrective Action
Parts don't fitIncorrect alignmentCheck diagram; ensure dowels are fully inserted in correct holes.
Drawer sticks or won't closeRunners misalignedLoosen runner screws, align drawer, retighten. Apply wax.
Furniture wobblesUneven floor or loose jointsCheck all cam locks are fully tightened. Use shims under feet if floor is uneven.
Cam lock won't tightenCross-threaded or misalignedUnscrew completely, realign parts, and screw in again slowly.
Missing hardwarePackaging errorContact IKEA customer service for replacement parts.

Note: Do not force parts. Re-check the instruction steps if something seems wrong.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for details. Warranty does not cover damage from improper assembly, accidents, modification, or improper care.

For missing parts, assembly help, or other support:

Recycling: Dispose of packaging materials responsibly. For product end-of-life, check local recycling guidelines for wood and metal.

IKEA BJÖRKSNÄS 304.073.57 Nightstand instructions manual © - All Rights Reserved 2025