IKEA BJÖRKSNÄS 092.475.73 Bed Frame instructions manual

The IKEA BJÖRKSNÄS 092.475.73 is a solid wood bed frame featuring a timeless design with curved headboard and footboard, slatted bed base for mattress support, and underbed storage options. Constructed from sustainably sourced solid birch, it requires assembly and includes all necessary hardware. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts and Hardware 2. Safety Instructions 3. Assembly Instructions 4. Care and Maintenance 5. Specifications 6. Mattress Compatibility 7. Troubleshooting 8. Warranty Information 9. Contact Information

Parts and Hardware

All components included in the package: Solid birch wood panels, slatted bed base, screws, bolts, washers, and assembly tools.

Part NumberDescriptionQuantity
101Headboard panel1
102Footboard panel1
103Side rails (left/right)2
104Center support beam1
105Slatted bed base1 set
201Hex key (Allen wrench)1
202Wood dowels12
203Screws (50mm)16
204Bolts with washers8

Safety Instructions

Read all instructions before assembly. Ensure proper handling and installation.

  1. Assembly requires two adults; bed frame is heavy.
  2. Assemble on a soft surface to avoid scratching wood.
  3. Check all connections are tight before use.
  4. Use only IKEA-approved components; do not modify.
  5. Ensure bed frame is on level, stable floor.

WARNING! Do not allow children to climb or play on bed frame during assembly. Keep small hardware away from children.

Assembly Instructions

Follow step-by-step guide for proper assembly.

  1. Lay all parts on clean, soft surface.
  2. Insert wood dowels into pre-drilled holes in headboard and footboard.
  3. Attach side rails to headboard using provided screws.
  4. Connect footboard to side rails using same method.
  5. Install center support beam between side rails.
  6. Place slatted bed base onto side rails and center beam.
  7. Tighten all bolts and screws securely with hex key.
  8. Check stability; ensure no loose parts.

CAUTION! Do not overtighten screws to avoid wood splitting. Assemble in the room where bed will be used.

Care and Maintenance

Tip: Avoid placing bed in direct sunlight or near heat sources to prevent wood warping.

Specifications

Mattress Compatibility

Designed for standard queen-size mattresses (160x200 cm).

  1. Ensure mattress thickness does not exceed 30 cm.
  2. Use IKEA or compatible mattresses for best fit.
  3. Place mattress centered on slatted base.
  4. Check mattress does not overhang edges.

Note: Bed frame supports spring, foam, and latex mattresses.

Troubleshooting

SymptomPossible CauseCorrective Action
Squeaking noiseLoose screws/boltsTighten all connections with hex key.
Bed frame wobblesUneven floor/loose jointsCheck floor level; retighten side rail connections.
Slats not supportingSlats not properly seatedEnsure slats are correctly placed on rails and center beam.
Difficulty assemblingMisaligned dowelsDisassemble and realign parts; do not force connections.
Scratches on woodRough handlingUse touch-up pen (available from IKEA) for minor scratches.

Reset: If assembly fails, disassemble completely and restart from step 1.

Warranty Information

10-year limited warranty from date of purchase. Covers manufacturing defects in materials and workmanship. Warranty does not cover damage from improper assembly, accidents, modifications, or normal wear and tear. Proof of purchase required.

Contact Information

For assembly help, missing parts, or warranty claims:

Note: Keep this manual and purchase receipt for future reference.

IKEA BJÖRKSNÄS 092.475.73 Bed Frame instructions manual © - All Rights Reserved 2025