IKEA BJÖRKBERGET 104.896.60 Swivel Chair instructions manual

The IKEA BJÖRKBERGET 104.896.60 is a swivel chair designed for comfort and mobility in home or office settings. It features a swivel base with casters for easy movement, adjustable seat height, a supportive backrest, and a durable construction. Below are key sections for safety, assembly, features, adjustment, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Assembly Instructions 4. Specifications 5. Adjustments and Settings 6. Proper Use and Positioning 7. Care & Maintenance 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: Swivel base with 5 casters, Gas lift for height adjustment, Padded seat and backrest, Armrests, Tilt mechanism.

FeatureDescription
Swivel base360-degree rotation for easy movement and access
Casters (5)Smooth-rolling wheels for mobility on hard floors
Gas lift cylinderAdjusts seat height with lever control
Padded seatFoam cushion for comfort, upholstered fabric
BackrestErgonomic support, adjustable tilt tension
ArmrestsPadded arm support, fixed position
Tilt mechanismAllows rocking motion; lockable in upright position
Weight capacityMax load: 110 kg (242 lbs)
MaterialsSteel frame, polypropylene shell, polyester fabric
Tools includedAllen key provided for assembly

Package Contents

Unpack and verify all parts before assembly.

  1. Seat with attached backrest (1 piece)
  2. Swivel base with pre-attached casters (1 piece)
  3. Gas lift cylinder (1 piece)
  4. Armrests (2 pieces)
  5. Assembly hardware (screws, washers)
  6. Allen key tool
  7. Instruction manual

WARNING! Check for damaged parts; do not use if any component is broken or missing.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Work on a soft surface to avoid scratches.

  1. Attach armrests: Align armrests to sides of seat; secure with provided screws using Allen key.
  2. Insert gas lift: Place gas lift cylinder into hole on underside of seat; press firmly until it clicks.
  3. Attach base: Turn swivel base upside down; insert gas lift stem into center hole; press down until cylinder engages.
  4. Flip chair upright: Carefully turn chair right-side up; ensure base is securely attached.
  5. Test stability: Apply weight gently; check that all connections are tight and chair does not wobble.

CAUTION! Do not overtighten screws. Ensure gas lift is fully inserted before use.

Specifications

Adjustments and Settings

Height adjustment: Lift lever under seat front; raise or lower to desired height; release lever to lock.

Tilt tension: Rotate knob under seat (clockwise to increase resistance, counterclockwise to decrease).

Tilt lock: Pull lever under seat to lock chair in upright position; push to release for rocking.

Armrests: Fixed height; not adjustable.

Note: Adjust while seated for proper ergonomic alignment (feet flat on floor, knees at 90 degrees).

Proper Use and Positioning

For ergonomic comfort and safety:

  1. Adjust seat height so feet rest flat on floor with knees at 90-degree angle.
  2. Keep back against backrest for lumbar support.
  3. Position chair close to desk; armrests should not interfere with desk edge.
  4. Use swivel function to turn rather than twisting torso.
  5. Roll chair using casters; avoid dragging across floor.

Tip: Use on hard, even surfaces; casters may not roll well on thick carpets.

Care & Maintenance

Fabric cleaning: Vacuum regularly; spot clean with mild soap and damp cloth; do not soak.

Frame/base: Wipe with dry or slightly damp cloth; avoid abrasive cleaners.

Casters: Remove hair and debris periodically to maintain smooth rolling.

Check tightness: Every 6 months, ensure all screws are secure; tighten if necessary.

CAUTION! Do not use solvents or bleach; keep away from direct heat sources.

Safety Information

Weight limit: Do not exceed 110 kg (242 lbs).

Do not stand on chair or use as step ladder.

Keep fingers clear of moving parts (gas lift, swivel mechanism).

Ensure casters are locked if used on uneven surfaces (optional caster locks not included).

Children should not play with or on the chair unsupervised.

Warranty & Support

10-year limited warranty covers manufacturing defects in frame and gas lift under normal household use. Upholstery covered for 2 years. Proof of purchase required. For support, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.

Troubleshooting

SymptomPossible CauseCorrective Action
Chair wobblesLoose connectionsTighten all screws at armrests and base; ensure gas lift is fully seated.
Height adjustment not workingLever not engaged/gas lift issueCheck lever mechanism; ensure chair is unweighted when adjusting; contact support if gas lift fails.
Casters not rolling smoothlyDebris in wheelsRemove hair/dust from caster stems; clean floor surface.
Squeaking noisesMoving parts need lubricationApply silicone-based lubricant to swivel mechanism (do not use oil).
Fabric stainingSpills/regular useBlot immediately; clean with mild soap and damp cloth; test on hidden area first.

Replacement Parts: Available through IKEA parts department.

Service: 1-888-888-4532; www.ikea.com

IKEA BJÖRKBERGET 104.896.60 Swivel Chair instructions manual © - All Rights Reserved 2025