IKEA BINGSTA 404.542.30 Armchair instructions manual

The IKEA BINGSTA 404.542.30 is a classic-style armchair with a sturdy wooden frame, removable and washable cover, and comfortable cushioning. Designed for easy home assembly, it includes all necessary parts and tools. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Safety Instructions 2. Parts and Tools Included 3. Assembly Instructions 4. Care and Maintenance 5. Technical Specifications 6. Troubleshooting 7. Warranty Information

Safety Instructions

Important safety information for assembly and use.

Warning	Description
Assembly Surface	Assemble on a soft, clean surface to avoid scratching furniture or floor.
Weight Limit	Maximum load: 110 kg (242 lbs). Do not exceed.
Children	Do not allow children to climb or play on the armchair.
Stability	Ensure all screws and fittings are tightened securely.
Tool Use	Use only the provided Allen key. Keep tools away from children.

Parts and Tools Included

Check that all parts are present before starting assembly.

Main Frame: Backrest, seat frame, armrests (2), front legs (2), rear legs (2).
Hardware: Screws (12x), wooden dowels (8x), pre-attached cushion straps.
Cushions: Seat cushion (1), back cushion (1) – included in cover set.
Cover: Removable fabric cover (1 set).
Tools: Allen key (1).

NOTE! If any part is missing or damaged, contact IKEA customer service. Do not attempt assembly.

Assembly Instructions

Estimated assembly time: 30-45 minutes. Follow steps in order.

Prepare: Unpack all parts. Identify each piece using the part diagram.
Attach Legs: Connect front and rear legs to the seat frame using wooden dowels and screws. Tighten with Allen key.
Attach Armrests: Fix armrests to the seat frame and backrest using provided screws.
Secure Backrest: Align backrest with seat frame. Insert dowels and secure with screws from underneath.
Attach Cushions: Place seat cushion onto frame. Secure back cushion with attached straps.
Fit Cover: Pull fabric cover over the assembled frame. Ensure it fits snugly around all corners.
Final Check: Ensure all screws are tight. Test stability by applying gentle pressure.

CAUTION! Do not overtighten screws, as this may strip the wood. Assemble with a partner for easier handling.

Care and Maintenance

Fabric Cover: Remove cover and machine wash at 40°C (104°F) on gentle cycle. Do not bleach. Tumble dry low.
Frame: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners.
Cushions: Fluff regularly to maintain shape. Spot clean with mild soap if needed.
Wooden Parts: Avoid prolonged exposure to direct sunlight or high humidity.
Long-term Storage: Disassemble and store in a dry place. Keep cover in a breathable bag.

Technical Specifications

Product Dimensions: Width: 78 cm (30.7 in), Depth: 88 cm (34.6 in), Height: 101 cm (39.8 in).
Seat Dimensions: Width: 55 cm (21.7 in), Depth: 48 cm (18.9 in), Height: 46 cm (18.1 in).
Weight: 18.5 kg (40.8 lbs).
Frame Material: Solid wood (beech and plywood).
Cover Material: 100% polyester (removable, machine washable).
Cushion Fill: Polyurethane foam and polyester fiber.
Color Options: As per product range (e.g., beige, dark gray).
Warranty: 10-year limited warranty. See warranty card for details.

Troubleshooting

Issue	Possible Cause	Solution
Wobbly frame	Loose screws or misaligned parts	Check all connections. Tighten screws evenly. Ensure dowels are fully inserted.
Cover does not fit	Incorrect assembly or cover not stretched properly	Re-check assembly steps. Pull cover firmly from bottom to top.
Squeaking noise	Wood rubbing against wood or loose joints	Tighten all screws. Apply a small amount of furniture wax on joints if needed.
Cushion slips	Straps not secured or incorrect placement	Attach cushion straps tightly to the frame. Ensure cushion is centered.
Difficulty inserting screws	Misaligned holes or cross-threading	Do not force. Align parts precisely and start screws by hand.

Tip: Refer to the numbered illustrations in the printed manual for visual guidance.

Warranty Information

IKEA provides a 10-year limited warranty for the BINGSTA armchair frame, covering material and manufacturing defects under normal household use. The warranty does not cover damage from improper assembly, accidents, modifications, or commercial use. The fabric cover has a separate 1-year warranty. Retain your receipt as proof of purchase.

For warranty claims or product support, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com. For assembly help, visit the product page online for video instructions.

Recycling: At end of life, disassemble and recycle materials according to local regulations. Wood, metal, and fabric can often be recycled separately.