IKEA BILLY 394.368.26 Bookcase instructions manual

The IKEA BILLY 394.368.26 is a classic, versatile bookcase designed for home storage and display. It features a sturdy particleboard construction with a white finish, adjustable shelves, and a simple, timeless design that fits various room styles. Below are key sections for safety, assembly, installation, usage, care, and troubleshooting.

1. Product Overview 2. Safety Instructions 3. Included Parts & Tools 4. Assembly Instructions 5. Installation & Placement 6. Adjusting Shelves 7. Weight Capacity & Usage 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Product Overview

Key components: Main frame, adjustable shelves, back panel, wall attachment hardware.

ComponentDescription
Main FrameParticleboard construction with white finish
Adjustable ShelvesMultiple shelves with adjustable height positions
Back PanelFiberboard panel for stability
Wall Attachment HardwareBrackets and screws for securing to wall
Cam Locks & DowelsFor connecting frame pieces
Assembly ToolIncluded Allen key

Safety Instructions

Read all instructions before assembly. Ensure proper handling and installation.

  1. Assemble on soft surface to avoid scratches.
  2. Use two people for assembly and moving.
  3. Always secure bookcase to wall using provided hardware.
  4. Do not exceed maximum weight capacity per shelf.

WARNING! Unsecured bookcases can tip over and cause serious injury. Always attach to wall.

Included Parts & Tools

Check all parts before starting assembly.

CAUTION! Do not discard any parts until assembly is complete.

Assembly Instructions

Follow step-by-step assembly process.

  1. Lay side panels on soft surface.
  2. Insert dowels into pre-drilled holes in side panels.
  3. Attach top and bottom panels using cam locks.
  4. Insert back panel into grooves and secure with provided nails.
  5. Install shelves by placing on shelf support pins.
  6. Attach wall brackets to back of bookcase.
  7. Secure bookcase to wall using wall anchors and screws.

Tip: Tighten all cam locks fully for stability.

Installation & Placement

Choose appropriate location for bookcase.

  1. Place on level, stable floor surface.
  2. Ensure adequate clearance from heat sources and moisture.
  3. Mark wall for bracket installation using level.
  4. Drill holes and insert wall anchors.
  5. Secure bookcase to wall through brackets.

WARNING! Never place heavy items on top shelf. Distribute weight evenly.

Adjusting Shelves

Shelves can be adjusted to different heights.

  1. Remove items from shelf.
  2. Lift shelf up and out of support pins.
  3. Reposition support pins to desired height.
  4. Place shelf on new support pins.
  5. Ensure shelf is level and secure.

Note: Maximum adjustment positions are marked inside side panels.

Weight Capacity & Usage

CAUTION! Do not exceed weight limits. Heavy items should be placed on lower shelves.

Care & Maintenance

Clean regularly to maintain appearance.

  1. Dust with soft, dry cloth.
  2. For stains, use damp cloth with mild soap solution.
  3. Dry immediately with clean cloth.
  4. Do not use abrasive cleaners or solvents.

Tip: Avoid placing wet items directly on surfaces.

Troubleshooting

SymptomPossible CauseCorrective Action
Bookcase wobblesUneven floor or loose connectionsCheck floor level; tighten all cam locks and screws
Shelf sagsExcess weightReduce weight on shelf; redistribute items
Difficulty adjusting shelvesSupport pins stuckRemove shelf completely; check pin alignment
Back panel looseNails not secureAdd additional nails; ensure panel fits in grooves
Scratches on surfaceRough handlingUse touch-up paint for minor scratches

Warranty & Support

IKEA limited warranty applies. For assistance:

Note: Keep receipt for warranty claims.

IKEA BILLY 394.368.26 Bookcase instructions manual © - All Rights Reserved 2025