IKEA BILLY 090.178.26 Bookcase instructions manual

The IKEA BILLY 090.178.26 is a versatile and classic bookcase designed for home storage and display. It features adjustable shelves, a sturdy construction suitable for books and decorative items, and a design that fits various room styles. Below are key sections for safety, assembly, installation, care, and warranty information.

Features at a Glance

Key components: Main frame, adjustable shelves, back panel, assembly hardware, and wall attachment device.

Package Contents

Unpack and verify all parts before starting assembly.

1. Main bookcase frame panels (sides, top, bottom).
2. Adjustable shelves (quantity as per model).
3. Back panel (fiberboard).
4. Assembly hardware pack (screws, cam locks, dowels, wall attachment device).
5. Instruction manual.

IMPORTANT! Check for any damaged or missing parts before assembly. Contact IKEA customer service if anything is missing.

Safety Instructions

Always follow safety guidelines to prevent injury and ensure stability.

1. Use two people for assembly and moving the bookcase.
2. Assemble on a soft, clean surface to avoid scratching parts.
3. Always secure the bookcase to the wall using the provided wall attachment device to prevent tipping.
4. Do not exceed the maximum load capacity (see specifications).
5. Keep small children away during assembly.

WARNING! Unsecured bookcases can tip over and cause serious injury or death. Always secure to wall.

Assembly Instructions

Follow step-by-step instructions for proper assembly.

1. Lay out all parts and hardware. Identify each piece using the manual diagrams.
2. Attach the top and bottom panels to the side panels using cam locks and dowels.
3. Insert the adjustable shelf support pins into the pre-drilled holes on the side panels.
4. Attach the back panel by inserting it into the grooves and securing with provided screws.
5. Place the shelves onto the support pins.
6. Attach the wall attachment device to the top rear of the bookcase and secure to a wall stud.

Tip: Do not fully tighten cam locks until all parts are aligned correctly.

Installation & Placement

• Location: Place on a flat, level floor against a wall.
• Wall Attachment: Must be attached to a solid wall (stud) using the provided device.
• Clearance: Ensure adequate space around the bookcase for ventilation and access.
• Weight Distribution: Place heavier items on lower shelves for stability.

Adjusting Shelves

Shelves can be repositioned to accommodate items of different heights.

1. Remove all items from the shelf you wish to adjust.
2. Lift the shelf up and out of the support pins.
3. Choose new desired height by aligning shelf with another set of support pin holes.
4. Lower shelf onto the pins, ensuring it is level and secure.

Note: Ensure shelves are evenly loaded and not overloaded.

Care & Maintenance

Clean with a damp cloth and mild detergent. Wipe dry immediately.

DO NOT use abrasive cleaners, scouring pads, or harsh chemicals that may damage the finish.

Avoid placing in direct sunlight or near heat sources to prevent fading or warping.

Specifications

• Model: BILLY 090.178.26
• Dimensions (HxWxD): As per specific model variant.
• Material: Particleboard, Foil, Paper foil, Fiberboard back.
• Color: As per variant (e.g., white, black-brown).
• Max Load per Shelf: Refer to label on product or manual.
• Weight: Varies by size.

Warranty Information

IKEA limited warranty applies. Refer to the IKEA warranty leaflet included with purchase or visit IKEA website for details specific to your country.

For warranty claims, retain your original receipt and contact IKEA customer service.

Troubleshooting

Customer Service: Visit www.ikea.com or contact your local IKEA store for assistance.