IKEA BETTORP 105.045.47 Table Lamp instructions manual

The IKEA BETTORP 105.045.47 is a modern table lamp featuring a sleek metal base and a fabric shade, designed for ambient lighting in living rooms, bedrooms, or offices. It operates with a maximum 7W E14 LED bulb (not included), includes an in-line switch on the power cord, and requires assembly. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Information 4. Assembly Instructions 5. Installation & Setup 6. Operation 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Metal base, Fabric shade, E14 bulb socket, In-line switch on cord.

Feature	Description
Design	Modern table lamp with metal base and fabric shade
Bulb Type	E14 socket, max 7W LED (bulb not included)
Switch	In-line switch on the power cord for easy operation
Power Cord	Standard power cord with plug
Dimensions	Approx. Height: 35 cm, Base diameter: 15 cm
Weight	Approx. 1.2 kg
Material	Base: Metal, Shade: Fabric
Color	Black/White (as per model variant)
Usage	Indoor use only, for tabletop placement
Assembly	Required (tools not included)

Package Contents

Unpack and verify all parts before assembly.

Metal lamp base (1 piece)
Fabric lamp shade (1 piece)
E14 bulb socket assembly with pre-attached cord (1 set)
Mounting hardware (screws, if required)
Instruction manual (this document)

NOTE: LED bulb (E14, max 7W) is NOT included. Purchase separately.

Safety Information

Read all safety instructions before assembly and use.

Use only with E14 LED bulb, max 7W. Do not exceed wattage.
Ensure lamp is unplugged during assembly and bulb replacement.
Place on stable, flat, heat-resistant surface away from edges.
Keep away from water, moisture, and heat sources.
Do not cover lamp shade while in use to prevent overheating.
This lamp is for indoor use only. Not for outdoor or damp locations.
Do not modify cord or plug. If damaged, discontinue use.
Keep out of reach of children and pets.

WARNING! Risk of electric shock or fire if used improperly. Use correct bulb and follow instructions.

Assembly Instructions

Assemble on a clean, soft surface to avoid scratches.

Place metal base upright on table.
Insert the E14 socket assembly into the top opening of the base. Ensure the cord exits through the designated hole at the bottom.
If included, secure the socket assembly to the base using the provided screw(s). Hand-tighten only.
Gently place the fabric shade over the socket assembly, aligning it with the base. It should sit securely without forcing.
Ensure the shade is straight and the cord is not twisted or pinched.

CAUTION! Do not overtighten screws. Handle fabric shade carefully to avoid tearing.

Installation & Setup

After assembly, install bulb and connect power.

Ensure lamp is unplugged.
Screw an E14 LED bulb (max 7W) into the socket. Do not overtighten.
Place the assembled lamp on a stable, flat surface (e.g., bedside table, desk).
Plug the power cord into a standard 120V AC wall outlet.
The in-line switch on the cord is now ready for use.

Tip: Position the lamp so the cord is safely routed away from foot traffic.

Operation

Simple on/off operation via the in-line switch.

To turn ON: Press the switch on the power cord to the "I" or ON position.
To turn OFF: Press the switch to the "O" or OFF position.
For bulb replacement: Always turn OFF and unplug the lamp first. Allow bulb to cool if it was recently on. Unscrew old bulb and replace with new E14 LED (max 7W).

NOTE: This lamp does not have a dimmer function. Use only with non-dimmable LED bulbs unless specified otherwise.

Care & Maintenance

Unplug lamp before any cleaning.

Metal Base: Wipe with a soft, dry cloth. For stubborn marks, use a slightly damp cloth. Do not use abrasive cleaners.
Fabric Shade: Dust gently with a soft brush or use a vacuum cleaner with a soft brush attachment. Do not wash or use liquids.
Cord and Switch: Wipe with dry cloth. Ensure no moisture enters the switch.
Store in a dry place if not in use for extended periods.

CAUTION! Never immerse lamp in water or use harsh chemicals. Do not clean while lamp is plugged in or hot.

Specifications

Model: BETTORP 105.045.47
Type: Table Lamp
Bulb Socket: E14
Max. Wattage: 7W LED (bulb not included)
Power Supply: 120V AC, 60Hz
Switch: In-line cord switch
Cord Length: Approx. 1.8 meters
Dimensions (H x W): Approx. 35 cm x 15 cm (base diameter)
Weight: Approx. 1.2 kg
Materials: Base: Metal, Shade: Fabric
Color Options: Black, White (as per product code)
Certifications: Complies with relevant safety standards

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; not plugged in; switch off	Replace bulb; ensure plug is in outlet; turn switch ON.
Flickering light	Loose bulb; incompatible bulb	Turn off, unplug, and tighten bulb. Ensure bulb is E14 LED, max 7W.
Lamp gets hot	Bulb wattage too high; shade covered	Use only 7W max LED bulb. Ensure shade is not covered by objects.
Shade is loose or crooked	Not properly seated during assembly	Turn off and unplug. Gently reposition shade onto base.
No power at all	Faulty outlet; damaged cord	Test outlet with another device. Inspect cord for damage. If damaged, discontinue use.

Reset: Unplug for 1 minute, then plug back in.

Warranty & Support

IKEA limited warranty applies. Refer to IKEA warranty terms for details. Keep your receipt as proof of purchase.

For Support: Visit the IKEA website (www.ikea.com) for your country or contact your local IKEA store. Provide model number BETTORP 105.045.47.

Recycling: Dispose of the lamp and bulb according to local electronic waste regulations. Do not dispose of with household trash.