IKEA BESTÅ 402.998.85 TV Stand instructions manual

The IKEA BESTÅ 402.998.85 is a modern TV stand designed for living rooms, featuring a clean design, cable management solutions, adjustable shelves, and sturdy construction. It supports TVs up to 65 inches and provides ample storage for media components. Below are key sections for safety, assembly, features, setup, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Assembly Instructions 5. Specifications 6. Setup and Installation 7. Adjustable Shelves 8. Cable Management 9. Care & Maintenance 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Main frame, adjustable shelves, glass doors, cable management holes, wall attachment hardware, and decorative panels.

Feature	Description
Main Frame	Sturdy particleboard construction with melamine foil finish
Adjustable Shelves	Two shelves with adjustable height positions
Glass Doors	Tempered glass doors with soft-closing hinges
Cable Management Holes	Rear panel holes for organizing cables
Wall Attachment Kit	Hardware included for securing to wall (mandatory for safety)
Decorative Panels	Optional panels available for custom look
TV Weight Capacity	Supports TVs up to 65 inches (max 55 lbs/25 kg)
Storage Compartments	Multiple compartments for media devices
Soft-Close Mechanism	Doors and drawers close quietly and smoothly
Assembly Required	All hardware and tools included except screwdriver

Package Contents

Unpack and verify all parts before assembly.

Main frame panels (A1, A2, A3, A4)
Adjustable shelves (B1, B2)
Glass doors (C1, C2) with hinges
Back panel (D)
Hardware pack: Screws, cam locks, dowels, wall attachment brackets
Assembly instructions (this manual)
Cable management clips

WARNING! Check for damaged parts before assembly. Contact IKEA if any parts are missing or damaged.

Safety Instructions

Follow these instructions carefully to ensure safe assembly and use.

Always secure the TV stand to the wall using the provided wall attachment kit to prevent tipping.
Place on a level, stable surface away from heat sources and moisture.
Do not exceed the maximum weight capacity (55 lbs/25 kg for TV, 110 lbs/50 kg total distributed weight).
Use two people for assembly and when moving the unit.
Keep small children away during assembly to prevent choking hazards from small parts.

CAUTION! Failure to secure to wall may result in serious injury or death from tipping.

Assembly Instructions

Tools Needed: Phillips screwdriver (not included), hammer (for dowels).
Time Estimate: 60-90 minutes for two people.
Difficulty: Moderate - follow step-by-step instructions.

Lay all parts on a soft surface to prevent scratches.
Identify all parts using the included part identification sheet.
Assemble main frame by connecting side panels to top and bottom panels using cam locks and dowels.
Attach back panel using provided screws.
Install adjustable shelves at desired height using shelf pins.
Attach glass doors using hinges (pre-attached to doors).
Install soft-close mechanisms if not pre-installed.
Secure TV stand to wall using wall attachment brackets (MANDATORY STEP).

Tip: Do not fully tighten screws until all parts are aligned correctly.

Specifications

Dimensions: 70 7/8" L x 15 3/4" D x 25 5/8" H (180cm x 40cm x 65cm).
Weight: 88 lbs (40 kg) when assembled.
Material: Particleboard, Fiberboard, ABS plastic, Tempered glass, Steel.
Finish: White stained oak effect, melamine foil.
Max TV Size: 65 inches (based on weight distribution).
Weight Capacity: TV: 55 lbs (25 kg), Total distributed weight: 110 lbs (50 kg).
Shelf Adjustment: 5 height positions per shelf.
Door Type: Tempered glass with soft-closing hinges.
Warranty: 10-year limited warranty (see warranty card).

Setup and Installation

Proper setup ensures stability and optimal use.

Choose location: Level floor, away from direct sunlight, heat sources, and high humidity.
Assemble according to instructions (Section 5).
Secure to wall: Locate wall studs, mount brackets, attach safety strap to TV stand.
Place TV: Center TV on stand, ensure weight is evenly distributed.
Organize components: Place heaviest items on bottom shelf for stability.

Important: Always use wall attachment. Test stability before placing TV.

Adjustable Shelves

Shelves can be positioned at different heights to accommodate various components.

Remove shelf by lifting up and pulling forward.
Adjust shelf pins to desired height (5 positions marked inside unit).
Insert shelf at angle, then lower into place.
Ensure shelf is level and securely seated on all pins.
For media components: Allow 1-2 inches ventilation space around devices.

Note: Do not overload shelves. Distribute weight evenly.

Cable Management

Use built-in features to organize cables for a clean appearance.

Route power cords through rear cable management holes.
Use included cable clips to bundle cables together.
Leave slack for devices that may need to be pulled forward.
Ensure cables don't pinch when adjusting shelves.
Keep cables away from heat-producing components.

Safety: Do not daisy-chain power strips. Use surge protector.

Care & Maintenance

Proper care extends the life of your TV stand.

Cleaning: Use soft, damp cloth. Dry immediately. For glass doors, use glass cleaner without ammonia.
Avoid: Abrasive cleaners, solvents, excessive moisture, direct heat sources.
Maintenance: Check wall attachment every 6 months. Tighten any loose screws.
Moving: Remove all items and TV before moving. Use two people.

CAUTION! Never stand or sit on the TV stand. Do not place hot items directly on surfaces.

Warranty Information

IKEA 10-year limited warranty. Covers manufacturing defects in materials and workmanship. Does not cover damage from improper assembly, accidents, modifications, or normal wear and tear. Keep receipt as proof of purchase. For warranty claims, contact IKEA customer service with product number (402.998.85) and purchase details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit wobbles	Uneven floor/loose screws	Check floor level; tighten all screws and cam locks; ensure wall attachment is secure.
Doors not closing properly	Hinge adjustment needed	Adjust hinge screws; ensure doors are square to frame.
Shelf won't stay in place	Shelf pins not fully seated	Remove shelf, ensure pins are at same height and fully inserted.
Scratches during assembly	Assembly on hard surface	Assemble on carpet or cardboard; use protective pads.
Missing parts	Package incomplete	Contact IKEA customer service with product number and missing parts list.
Glass door appears loose	Hinge screws loose	Tighten screws connecting hinge to door and frame.
Difficulty attaching to wall	Wall type issues	Use appropriate anchors for your wall type (drywall, plaster, concrete).

Customer Service: 1-888-888-4532 (IKEA US) or visit www.ikea.com

Product Support: Online assembly instructions at www.ikea.com/assembly