IKEA BESTÅ 094.219.68 Frame instructions manual

The IKEA BESTÅ 094.219.68 is a versatile frame component designed for building customizable storage solutions. It serves as the structural backbone for BESTÅ series cabinets, allowing for combination with various doors, drawers, and interior fittings. Below are key sections covering safety, assembly, installation, configuration, care, and warranty information.

Product Overview

Key components: Main frame structure, pre-drilled holes for shelves and hinges, adjustable feet, wall attachment brackets.

Included Parts & Tools

Unpack and verify all parts before starting assembly.

1. Frame panels: Side panels (x2), top panel, bottom panel.
2. Hardware pack: Cam locks, dowels, screws, wall brackets, adjustable feet.
3. Back panel: 1 piece, cut to size.
4. Required tools (not included): Phillips screwdriver, hammer, level, measuring tape.

IMPORTANT! Check for damage before assembly. Contact IKEA for missing parts.

Safety Instructions

Follow all safety guidelines to prevent injury and ensure stability.

1. Always secure frame to wall using provided brackets to prevent tipping.
2. Assemble on a soft, clean surface to avoid scratching panels.
3. Use two people for lifting and positioning assembled frame.
4. Do not exceed maximum load capacity: 110 lbs (50 kg) distributed evenly.

WARNING! Unsecured furniture can tip over and cause serious injury. Always anchor to wall.

Assembly Steps

• Step 1: Attach adjustable feet to bottom panel using provided screws.
• Step 2: Connect side panels to bottom panel using cam locks and dowels.
• Step 3: Attach top panel to side panels using same method.
• Step 4: Insert back panel into grooves and secure with small nails or screws.
• Step 5: Install cover caps to hide visible screw heads.

Tip: Do not fully tighten cam locks until all panels are aligned.

Mounting to Wall

Wall mounting is mandatory for safety.

1. Locate wall studs using a stud finder.
2. Position frame against wall and level using adjustable feet.
3. Attach wall brackets to frame using provided screws.
4. Mark drill points on wall through bracket holes.
5. Drill pilot holes into wall studs, insert wall anchors if needed.
6. Secure brackets to wall with screws, ensuring frame is firmly attached.

CAUTION! Use appropriate wall fasteners for your wall type (drywall, plaster, concrete).

Adding Doors & Drawers

Compatible with BESTÅ series doors and drawer fronts.

For Hinged Doors: Attach hinges to door first, then mount to frame using hinge screws. Adjust with built-in screws for alignment.

For Drawers: Install drawer runners on side panels, then attach drawer box. Secure front panel to drawer box.

Adjustment: Use hinge screws to adjust door height, depth, and side-to-side position.

Adjusting Shelves

Shelves can be placed at different heights using pre-drilled holes.

1. Insert shelf pins into desired holes on side panels.
2. Place shelf on pins, ensuring it is level and secure.
3. For glass shelves, use provided rubber pads to prevent slipping.
4. Maximum load per shelf: 33 lbs (15 kg) for particleboard, 22 lbs (10 kg) for glass.

Note: Distribute weight evenly to prevent sagging.

Care & Maintenance

Clean with damp cloth and mild detergent. Avoid abrasive cleaners.

CAUTION! Do not soak or allow water to penetrate edges. Wipe spills immediately.

Technical Specifications

• Model: BESTÅ 094.219.68
• Dimensions (W x H x D): 47 1/4" x 15 3/4" x 15 3/4" (120 x 40 x 40 cm)
• Material: Particleboard, foil, plastic, steel
• Weight: 44 lbs (20 kg)
• Max Load Capacity: 110 lbs (50 kg) total
• Color: White
• Warranty: 10-year limited warranty

Warranty & Support

10-year limited warranty from date of purchase. Covers material and manufacturing defects. Does not cover damage from improper assembly, misuse, or normal wear. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Replacement Parts: Available at IKEA stores or online.

Customer Service: 1-888-888-4532 (IKEA-USA)