IKEA BESTÅ 092.098.49 Frame instructions manual

The IKEA BESTÅ 092.098.49 is a versatile frame component designed for building customizable storage solutions. It serves as the structural skeleton for BESTÅ series cabinets, supporting various doors, drawers, and shelves. This manual provides essential information for safe assembly, installation, configuration, and maintenance of your BESTÅ frame.

1. Parts & Hardware Overview 2. Safety Information 3. Assembly Instructions 4. Mounting to Wall 5. Installing Interior Components 6. Adjusting Doors & Drawers 7. Specifications & Dimensions 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Parts & Hardware Overview

Key components included with the BESTÅ 092.098.49 frame.

Part Name	Description	Quantity
Frame Side Panel	Main vertical side panel (left & right)	2
Frame Top/Bottom Panel	Horizontal top and bottom panel	2
Frame Back Panel	Fiberboard back panel for stability	1
Cam Lock Nuts	For connecting panels (pre-installed)	8
Cam Lock Screws	To secure cam locks	8
Wall Attachment Hardware	Brackets and screws for securing to wall	1 set
Adjustable Feet	Plastic feet for floor leveling	4
Instruction Manual	This guide	1

Safety Information

Critical safety warnings for assembly and use.

Tip-Over Hazard: Unanchored furniture can tip over. Always secure this frame to the wall using the provided wall attachment device.
Weight Limit: Do not exceed the maximum load capacity of 110 lbs (50 kg) distributed evenly.
Assembly: Assemble on a soft, clean surface to avoid scratching panels. Use correct tools.
Lifting: The assembled frame is heavy. Use two people for moving and mounting.
Children: Do not allow children to climb or hang on doors or drawers.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure furniture to the wall.

Assembly Instructions

Step-by-step guide to assemble the BESTÅ frame.

Prepare Workspace: Lay all parts on a clean, soft surface (e.g., carpet or blanket).
Attach Feet: Screw the four adjustable feet into the pre-drilled holes on the bottom panel.
Connect Side & Bottom Panel: Insert cam lock screws from the bottom panel into the side panels. Tighten cam locks clockwise using a screwdriver.
Attach Top Panel: Connect the top panel to the side panels using the same cam lock method.
Install Back Panel: Place the frame face down. Align the back panel and secure it using the provided nails or screws into the pre-drilled holes on all four sides.
Check Stability: Ensure all cam locks are fully tightened (flush with the panel surface) and the frame is square.

Tip: Do not fully tighten cam locks until all panels are connected to allow for alignment adjustments.

Mounting to Wall

Essential steps to secure the frame and prevent tipping.

Locate Wall Studs: Use a stud finder to locate solid wood studs in your wall. Mark their positions.
Position Frame: Place the assembled frame in its desired final location, ensuring it is level using the adjustable feet.
Attach Brackets to Frame: Using the provided screws, attach the wall mounting brackets to the top rear inside corners of the frame.
Secure to Wall: Hold the frame firmly against the wall. Drill screws through the bracket holes and directly into the wall studs. Ensure screws are tight and secure.
Final Check: Gently try to tilt the frame forward. It should not move if properly secured.

CAUTION! If you cannot attach to a stud, you must use appropriate wall anchors suitable for your wall type (drywall, plaster, etc.) and the weight of the loaded unit. The provided screws are for wood studs only.

Installing Interior Components

How to add shelves, drawers, and other interior fittings.

Shelves: Insert shelf supports into the desired height holes on the inner sides of the frame. Place the shelf on the supports.
Drawer Runners: Attach the runner halves to the inner sides of the frame according to the drawer package instructions. Ensure they are level and at the same height on both sides.
LED Lighting (Optional): For BESTÅ lighting, follow the specific lighting kit instructions. Typically involves attaching a rail and connecting the driver.

Note: Always refer to the specific instruction manual for the doors, drawers, or interior fittings you have purchased, as installation may vary.

Adjusting Doors & Drawers

Fine-tuning for perfect alignment.

Door Height Adjustment: Use a screwdriver to turn the adjustment screws located at the top and bottom of the hinge arm (where it connects to the frame).
Door Depth/In-Out Adjustment: Locate the screw on the hinge where it mounts to the frame. Turning this moves the door closer to or farther from the frame.
Door Side-to-Side Adjustment: Loosen the screws that secure the hinge to the door itself, adjust position, and retighten.
Drawer Alignment: Most BESTÅ drawers have an adjustment mechanism on the runner. Look for a lever or screw that allows the drawer front to be moved up/down or left/right.

Tip: Make small adjustments and check alignment after each turn.

Specifications & Dimensions

Model Number: BESTÅ 092.098.49
Frame Color: White
Material: Particleboard, Fiberboard, Plastic, Steel
Overall Dimensions (W x H x D): 47 1/4" x 15 3/4" x 15 3/4" (120 cm x 40 cm x 40 cm)
Inner Dimensions (Approx.): 44 7/8" x 14 1/8" x 14 1/8" (114 cm x 36 cm x 36 cm)
Weight (Frame only): 44 lbs (20 kg)
Max Load Capacity: 110 lbs (50 kg) evenly distributed
Required Tools for Assembly: Phillips screwdriver, Hammer (for back panel nails), Stud finder, Level, Drill (for wall mounting)

Care & Maintenance

To keep your BESTÅ frame looking new.

Cleaning: Wipe with a damp cloth. Wipe dry with a clean cloth.
Stains: Use a mild soapy solution. Never use abrasive cleaners, scouring pads, or solvents.
Protection: Avoid placing in direct sunlight or near heat sources to prevent fading/warping.
Moving: Empty all contents before moving. Detach doors and drawers if possible to prevent damage.

CAUTION! Never soak the frame or allow liquid to pool on surfaces or enter joints.

Troubleshooting

Problem	Possible Cause	Solution
Frame is wobbly	Cam locks not tightened; Back panel not secured; Uneven floor	Tighten all cam locks; Secure back panel firmly; Adjust the feet to level the frame.
Do not align	Hinges need adjustment; Frame is not square	Use hinge adjustment screws (see Section 7); Check frame assembly and ensure back panel is correctly installed to square the unit.
Drawer sticks or is difficult to open	Runners misaligned; Drawer overloaded	Check runner alignment on both sides; Ensure nothing is obstructing the drawer path; Reduce weight in drawer.
Gaps between panels	Assembly sequence incorrect; Cam locks not engaged	Disassemble and follow steps in Section 4 carefully. Ensure cam lock screws are fully inserted before turning the cam lock.
Sagging shelf	Weight limit exceeded; Shelf supports not correctly placed	Remove excess weight. Ensure shelf supports are fully inserted into the correct holes and the shelf is centered on them.

Warranty & Support

IKEA limited warranty. For BESTÅ series, refer to the IKEA warranty terms included with your purchase or available at IKEA stores and www.IKEA.com.

Need Help?

Assembly Help: Visit the IKEA website for assembly videos and guides.
Missing Parts: Contact your local IKEA store or visit the Spare Parts desk.
Customer Support: Visit www.IKEA.com for your country's contact information.

Recycling: At the end of its life, disassemble and recycle materials according to your local regulations. IKEA offers take-back services in some regions.