IKEA BESTÅ 004.740.70 TV Stand instructions manual

The IKEA BESTÅ 004.740.70 is a versatile TV stand unit designed for living rooms, featuring a clean, modern design with adjustable shelves, cable management, and compatibility with BESTÅ system doors and drawers. Constructed from particleboard, fiberboard, and ABS plastic, it requires assembly. Below are key sections for safety, parts list, assembly instructions, installation, care, and warranty information.

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Main frame panels, shelves, back panel, mounting hardware, cam locks, screws, dowels, wall attachment device.

Safety Instructions

Read all instructions before assembly. Use on stable, level floor.

1. Tip-over prevention: This furniture can tip over. Always use the included wall attachment device to secure to wall.
2. Weight limit: Do not exceed max load: Top surface 50 kg (110 lbs), each shelf 20 kg (44 lbs).
3. Assembly: Two people recommended. Use provided tools only.
4. Placement: Keep away from heat sources and humidity. Do not place on uneven surfaces.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure to wall.

Assembly Instructions

Follow steps in order. Lay parts on soft surface to avoid scratches.

1. Step 1: Connect side panels (A, B) to bottom panel (D) using dowels (H) and cam locks (G). Tighten with Allen key.
2. Step 2: Attach top panel (C) to side panels using same method.
3. Step 3: Insert back panel (F) into grooves on rear of frame. Secure with small nails/screws provided.
4. Step 4: Insert adjustable shelves (E) into desired position using shelf pins (pre-installed holes).
5. Step 5: Attach wall bracket to back panel and secure to wall stud using appropriate wall anchors (not included for all wall types).

Tip: Do not fully tighten cam locks until all parts are aligned.

Specifications

• Model: BESTÅ 004.740.70
• Dimensions (W x H x D): 120 cm x 40 cm x 38 cm (47 1/4" x 15 3/4" x 15")
• Material: Particleboard, Fiberboard, ABS plastic, Foil
• Color: Black-Brown
• Max Load Top: 50 kg (110 lbs)
• Max Load per Shelf: 20 kg (44 lbs)
• Weight (package): 25.5 kg (56.2 lbs)
• Required Tools: Allen key (included), Phillips screwdriver, hammer (for back panel nails).
• Compatibility: Fits most TVs up to 55 inches (check TV base size). Compatible with BESTÅ doors (sold separately).

Installation & Leveling

After assembly, place unit against wall and secure.

1. Position stand where desired, ensuring rear is flush against wall.
2. Locate wall studs. Use stud finder if necessary.
3. Attach wall bracket to back panel with provided screws.
4. Align bracket with wall stud, mark holes, drill pilot holes, and secure bracket to wall with screws (ensure screws are long enough for wall type).
5. Check level using spirit level on top surface. Adjust furniture feet if uneven (some models have adjustable glides).

CAUTION! If not attached to wall, furniture can tip over causing serious injury.

Adjusting Shelves

Shelves are adjustable to accommodate components.

1. Remove shelf by lifting up and pulling forward.
2. Reposition shelf pins in desired holes (holes spaced every 3 cm / 1.2").
3. Insert shelf onto pins, ensuring it sits level and secure.
4. For media components, ensure adequate ventilation space above device.

Note: Do not place heavy items on unsupported sections of shelf.

Cable Management

Use rear cable management features to organize wires.

1. Route cables from TV and components through pre-cut openings in back panel.
2. Use cable clips (included) to bundle cables along back frame.
3. For power strips, place on shelf or mount to back panel using adhesive strips (not included).
4. Ensure cables do not pinch when moving unit.

Tip: Label cables for easy identification.

Adding Doors & Drawers

Compatible with BESTÅ system doors/drawers (sold separately).

1. Purchase compatible BESTÅ door (e.g., HÖGBO, VASSBO series) or drawer front.
2. Attach hinges to door per hinge instructions.
3. Mount hinges to pre-drilled holes inside frame (standard 37 mm system).
4. Adjust door alignment using hinge screws for perfect fit.
5. For drawers, install drawer runners on side panels, then attach drawer box.

Note: Ensure hinges/drawers are designed for BESTÅ frame depth of 38 cm.

Care & Cleaning

Use proper methods to maintain finish.

• Dusting: Use soft, lint-free cloth. Microfiber recommended.
• Stains: Dampen cloth with mild soapy water, wring well. Wipe surface, then dry immediately.
• Avoid: Abrasive cleaners, scouring pads, solvents, ammonia-based cleaners.
• Protect: Use coasters under drinks. Avoid direct sunlight to prevent fading.

CAUTION! Do not soak or allow moisture to seep into edges as particleboard can swell.

Warranty & Support

IKEA limited warranty. See IKEA terms or receipt for details.

• Warranty: Typically 10 years for frame, 1 year for moving parts (hinges, runners).
• Support: For missing parts or assembly help, contact IKEA customer service.
• Spare Parts: Available at IKEA store or via IKEA website.
• Contact: IKEA Customer Support: 1-888-888-4532 (US) or visit www.ikea.com.

Note: Keep receipt as proof of purchase for warranty claims.

Troubleshooting

Safety Check: Periodically check wall attachment and tighten screws if loose.

Recycling: Disassemble and recycle materials according to local regulations.