IKEA BESTÅ BURS 302.691.29 TV Stand instructions manual

The IKEA BESTÅ BURS 302.691.29 is a versatile TV stand designed for living rooms, offering ample storage with its combination of drawers and doors. It features a clean, modern design, is constructed from particleboard and fiberboard with foil and ABS plastic edging, and requires assembly. Below are key sections for safety, assembly, installation, use, care, and warranty information.

1. Product Overview & Contents 2. Safety Instructions 3. Assembly Instructions 4. Installation & Placement 5. Using Your TV Stand 6. Care & Maintenance 7. Technical Specifications 8. Troubleshooting 9. Warranty & Support

Product Overview & Contents

Key components: Frame panels, shelves, drawers, doors, hinges, handles, screws, cam locks, and assembly tools (Allen key).

Component	Description	Quantity
Main Frame Panels	Side, top, and bottom panels	As per pack list
Shelves	Adjustable interior shelves	2
Drawers	Front-mounted drawers with runners	2
Doors	Hinged front doors	2
Hinges & Handles	Concealed hinges and door/drawer handles	1 set
Hardware Pack	Screws, cam locks, dowels, plugs	1 pack
Allen Key	Tool for assembly	1
Instruction Manual	This document	1

Safety Instructions

Read all instructions before assembly. Ensure a safe environment.

Work Area: Assemble on a soft, clean surface to avoid scratches.
Lifting: The assembled unit is heavy. Use two people for lifting and moving.
Secure Assembly: Tighten all screws and fittings securely. Do not overtighten.
Wall Attachment: To prevent tipping, especially if children are present, the TV stand MUST be securely attached to the wall using the included wall-anchoring device and screws suitable for your wall type.
Weight Limit: Do not exceed the maximum load capacity of 55 lbs (25 kg) per shelf and 110 lbs (50 kg) for the top surface.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall.

Assembly Instructions

Follow the numbered steps in the included pictorial guide. Use the provided Allen key.

Prepare: Unpack all parts and hardware. Check against the parts list.
Build Frame: Connect side panels to top and bottom panels using cam locks and dowels.
Install Back Panel: Secure the fiberboard back panel with provided screws to square the frame.
Add Interior: Insert the fixed shelf and position adjustable shelf supports.
Attach Drawers: Assemble drawer boxes and attach runners to the frame before inserting drawers.
Mount Doors: Attach hinges to doors, then mount doors to the frame. Adjust hinges for alignment.
Attach Handles: Screw handles onto doors and drawers.
Final Check: Ensure all parts are secure, doors/drawers open smoothly, and the unit is stable.

Tip: Do not fully tighten cam locks until the entire frame is assembled and squared.

Installation & Placement

Choose a location on a hard, level floor away from direct heat sources or humidity.
Move the assembled unit into place with the help of another person.
CRITICAL: Attach the unit to the wall using the provided anti-tip device. Locate wall studs and use appropriate screws (not always included).
Place your TV centrally on the top surface, ensuring its feet are within the stand's boundaries.
Route cables through the pre-cut holes in the back panel for a tidy appearance.

CAUTION! An unsecured piece of furniture can tip over. Wall attachment is mandatory for safety.

Using Your TV Stand

Storage: Use drawers for remotes and small items. Use shelves for media players, game consoles, or books.
Ventilation: Do not block ventilation openings of electronic devices placed inside. Leave space around hot components.
Adjustable Shelves: Shelf heights can be changed by moving the metal supports to different pre-drilled holes.
Door Adjustment: If doors are misaligned, use the Allen key to adjust the concealed hinges (turn the screw behind the door).

Care & Maintenance

Clean with a damp cloth wrung out in a mild soap solution. Wipe dry immediately.

DO NOT use abrasive cleaners, scouring pads, or solvents as they can damage the surface.

To maintain smooth operation, occasionally clean drawer runners and door hinges with a dry cloth.

Technical Specifications

Article Number: 302.691.29
Designer: IKEA of Sweden
Color: Black-Brown
Material: Particleboard, Fiberboard, Foil, ABS plastic
Dimensions (W x H x D): 70 7/8" x 15 3/4" x 16 1/2" (180 cm x 40 cm x 42 cm)
Max. Load Top: 110 lbs (50 kg)
Max. Load Shelf: 55 lbs (25 kg)
Package(s): 2
Weight (assembled): Approx. 88 lbs (40 kg)

Troubleshooting

Issue	Possible Cause	Solution
Unit wobbles	Floor uneven or assembly loose	Check floor; re-tighten all frame connections and cam locks.
Drawer sticks	Runner misaligned or obstructed	Remove drawer, check runner alignment, and clear any obstructions.
Door misaligned	Hinge needs adjustment	Use Allen key to adjust the horizontal/vertical screws on the hinge.
Shelf won't stay	Support pins not fully engaged	Ensure shelf support pins are clicked firmly into the pre-drilled holes.
Scratches during assembly	Assembly on hard surface	Always assemble on the included cardboard or a soft blanket.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the "Important Information" booklet or at IKEA stores.

Missing Parts? Contact your local IKEA store for spare parts.

Assembly Help? Visit the IKEA website for assembly instructions and videos.

IKEA Customer Support: Visit www.ikea.com or contact your local IKEA store.