IKEA BESTÅ 091.397.24 Hinge instructions manual

The IKEA BESTÅ 091.397.24 is a concealed hinge designed for BESTÅ cabinet doors, featuring adjustable settings for door alignment (height, depth, and side-to-side), soft-closing mechanism, and compatibility with specific BESTÅ frames and door sizes. Below are key sections for features, installation, adjustment, compatibility, care, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Installation Instructions 4. Adjustment Settings 5. Compatibility 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Features at a Glance

Key components: Hinge arm, mounting plate, adjustment screws (height, depth, side), soft-closing mechanism, screws for attachment.

Feature	Description
Concealed design	Hides inside cabinet for clean appearance
Soft-closing	Prevents door slamming; ensures quiet closure
3-way adjustment	Adjust height, depth, and side-to-side alignment
Mounting plate	Attaches to cabinet frame; allows hinge installation
Compatibility	Designed for BESTÅ frames and specific door thicknesses
Material	Steel construction with nickel or zinc finish
Installation tools	Requires Phillips screwdriver and drill (if pre-drilling needed)
Load capacity	Suitable for standard BESTÅ door weights
Adjustment screws	Located on hinge arm for fine-tuning
Packaging	Includes screws and mounting hardware

Parts Included

Unpack and verify all parts before installation.

Hinge arm: 1 piece (091.397.24).
Mounting plate: 1 piece.
Screws: For hinge to door (4x), for plate to frame (2x).
Adjustment screws: Pre-installed on hinge.
Instruction sheet: Included in package.

WARNING! Do not discard packaging until all parts are verified. Missing parts? Contact IKEA support.

Installation Instructions

Follow steps carefully for proper hinge function.

Prepare door and frame: Ensure door is compatible (see Compatibility section). Mark drill holes if not pre-drilled.
Attach mounting plate: Secure plate to cabinet frame using provided screws. Ensure it is level.
Attach hinge to door: Align hinge with door holes (typically 35mm diameter). Secure with screws; do not overtighten.
Connect hinge to plate: Hook hinge arm onto mounting plate; press until it clicks into place.
Test movement: Open and close door to check alignment and soft-close function.

CAUTION! Use correct screw length to avoid damaging door or frame. Ensure door is supported during installation.

Adjustment Settings

Adjust doors after installation for perfect alignment.

Height adjustment: Turn screw on hinge arm (usually top screw) to move door up or down.
Depth adjustment: Turn screw (usually middle) to move door closer to or farther from frame.
Side adjustment: Turn screw (usually bottom) to shift door left or right.
Soft-close adjustment: No adjustment needed; mechanism is pre-set. If not working, check hinge installation.

Tip: Make small adjustments (quarter turns) and test door after each change.

Compatibility

Frames: BESTÅ series frames with pre-drilled holes for concealed hinges.
Doors: BESTÅ doors with thickness 16-19mm and 35mm hinge cup holes.
Maximum door weight: Refer to IKEA BESTÅ specifications (typically up to 8kg per hinge).
Not compatible: Non-BESTÅ frames, doors without pre-drilled holes, glass doors without proper reinforcement.

Note: Always verify compatibility with your specific BESTÅ model before installation.

Care & Maintenance

Clean with dry cloth only; avoid liquids or abrasive cleaners.

Regular check: Inspect screws for tightness every 6 months.
Cleaning: Wipe hinge with dry cloth to remove dust.
Lubrication: Do not lubricate; soft-close mechanism is self-contained.

CAUTION! Do not use water or chemicals; may damage mechanism. Avoid forcing door beyond its stop.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Door not closing smoothly	Misalignment or obstruction	Adjust height/depth/side screws; check for items blocking door.
Soft-close not working	Hinge not fully engaged or damaged	Reattach hinge to plate; ensure click is heard; replace if defective.
Door sagging	Loose screws or overloaded door	Tighten screws on hinge and plate; ensure door weight is within limit.
Hinge not fitting frame	Incompatible frame or incorrect installation	Verify compatibility; ensure mounting plate is correctly positioned.
Squeaking noise	Dust or lack of lubrication (rare)	Clean hinge; if persists, contact IKEA (do not oil).

Reset: Remove and reinstall hinge if adjustments do not solve issue.

Warranty & Support

IKEA limited warranty applies (see IKEA terms). For support, visit www.ikea.com or contact your local IKEA store. Product number: 091.397.24. Keep receipt for warranty claims.