IKEA BERGMUND 194.770.35 Chair Cover instructions manual

The IKEA BERGMUND 194.770.35 is a replacement chair cover designed for BERGMUND chair frames. It is made from durable, easy-to-clean fabric and is available in various colors. This manual provides instructions for unpacking, inspecting, and correctly installing the cover onto the chair frame to ensure a secure and aesthetic fit. Below are key sections for safety, features, preparation, step-by-step installation, care, and warranty information.

1. Package Contents & Inspection 2. Safety Information 3. Before You Begin 4. Step-by-Step Installation 5. Adjusting & Securing 6. Care & Maintenance 7. Troubleshooting 8. Specifications & Warranty

Package Contents & Inspection

Open the package and verify all parts are present and undamaged.

Item	Description	Quantity
Chair Cover	Main fabric cover with integrated straps	1
Elastic Straps	Pre-attached elastic bands for securing to frame	4-6 (attached)
Instruction Manual	This document	1

Note: The chair frame is NOT included. This cover is designed specifically for the BERGMUND chair frame (model 194.770.35 or compatible).

Safety Information

Please read all instructions before assembly and use.

Work Area: Choose a clean, spacious, and well-lit area free of sharp objects.
Handling: The cover is not a load-bearing component. Ensure the chair frame is stable and assembled correctly before attaching the cover.
Children & Pets: Keep small parts and packaging materials away from children and pets to avoid risk of suffocation.
Inspection: Do not use the cover if it is torn, damaged, or if the elastic straps are loose or broken.

WARNING! An improperly secured cover can slip or bunch up, creating a tripping hazard or causing the user to sit unevenly. Ensure all straps are tight and secure.

Before You Begin

Ensure you have the correct chair frame and a clean workspace.

Identify Frame: Confirm you have the IKEA BERGMUND chair frame. The cover is model-specific.
Clean Frame: Wipe down the chair frame with a dry cloth to remove any dust or debris.
Unfold Cover: Lay the cover flat with the inside facing up. Identify the front, back, top, and bottom.
Locate Straps: Identify all elastic straps and their corresponding attachment points on the chair frame (usually under the seat and at the back).

Tip: It is easier to install the cover with the chair frame placed upside down on a soft surface (like a carpet) to prevent scratching.

Step-by-Step Installation

Follow these steps in order for a proper fit.

Position Cover: Drape the cover over the chair frame, aligning the seams with the frame's contours. The cover's front should match the chair's front.
Secure Seat: Pull the cover down over the seat cushion. Reach underneath and attach the seat's elastic straps to the corresponding bars or hooks on the underside of the seat frame. Ensure the fabric is smooth and wrinkle-free on top.
Secure Back: Pull the cover over the backrest. Attach the backrest straps to the frame at the lower back, typically crossing them for tension.
Fit Corners: Tuck and smooth the cover material into the crevices where the seat meets the backrest and armrests (if applicable).
Final Adjustment: Stand the chair upright. Smooth out any remaining wrinkles or bunches by pulling the fabric outward from the center.

CAUTION! Do not over-stretch the elastic straps, as this may damage them or the fabric.

Adjusting & Securing

After initial installation, check and adjust for a perfect fit.

Even Tension: All straps should have similar, firm tension. The cover should not sag or shift when pressure is applied.
Wrinkle Check: Run your hands over the seat and back to eliminate wrinkles for a neat appearance and comfortable feel.
Strap Hook Check: Ensure all strap hooks are securely fastened and have not come loose during adjustment.
Test Stability: Gently sit in the chair and shift your weight. The cover should remain firmly in place.

Care & Maintenance

Proper care will extend the life of your chair cover.

Regular Cleaning: Vacuum regularly with a soft brush attachment to remove dust and crumbs.
Spot Cleaning: Blot spills immediately with a clean, absorbent cloth. Use a mild soap solution and a damp cloth for stains. Always test on an inconspicuous area first.
Machine Washing (if applicable): Check the label. Some covers are removable and machine washable. Use a gentle cycle with cold water and mild detergent. Air dry completely; do not tumble dry unless specified.
Do Not: Do not bleach, iron, or dry clean unless the care label explicitly states it is safe.

CAUTION! Never re-install a damp or wet cover on the frame, as this can cause mold, mildew, or damage to both the cover and frame.

Troubleshooting

Issue	Possible Cause	Solution
Cover is loose or slips	Straps not attached or not tight enough	Re-check all strap connections under the seat and back. Tighten for a snug fit.
Wrinkles on seat/back	Cover not smoothed during installation	Remove cover, lay flat, and re-install, smoothing fabric as you go.
Cover seems too small	Wrong model or installed incorrectly	Verify cover model (194.770.35). Ensure it is meant for your specific BERGMUND frame variant.
Elastic straps are loose/broken	Normal wear and tear or damage	Contact IKEA customer service for a replacement cover. Do not use with damaged straps.
Color fading	Direct sunlight or harsh cleaning	Move chair out of direct sunlight. Follow care instructions for cleaning.

Specifications & Warranty

Product Name: BERGMUND Chair Cover
Article Number: 194.770.35
Compatible With: IKEA BERGMUND Chair Frame
Material: Polyester blend (check label for specific composition)
Care Instructions: See sewn-in label and Section 7 of this manual.
Warranty: IKEA limited warranty. For details, refer to the IKEA warranty booklet provided with your original purchase or visit www.ikea.com.
Customer Service: For missing parts, damage, or further assistance, contact your local IKEA store or visit www.ikea.com.

Note: This cover is a replacement part. Its warranty may differ from the original chair's warranty.