IKEA BAXNA 404.743.65 Organizer instructions manual

The IKEA BAXNA 404.743.65 is a versatile modular organizer system designed for efficient storage and organization in various spaces. It features durable construction, adjustable components, and a modern design. Below are key sections for safety, features, assembly, installation, usage, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Assembly Instructions 5. Installation & Placement 6. Usage Guidelines 7. Maintenance & Cleaning 8. Specifications 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: Modular shelves, dividers, hooks, mounting brackets, and connectors.

Feature	Description
Modular Design	Customizable configuration to fit your space and needs
Durable Material	Made from powder-coated steel and impact-resistant plastic
Adjustable Components	Shelves and dividers can be repositioned
Wall Mountable	Includes hardware for secure wall installation
Tool-Free Assembly	Most parts snap together without tools
Multiple Color Options	Available in white, black, and silver finishes
Weight Capacity	Each shelf supports up to 15 lbs (6.8 kg)
Dimensions	Main unit: 24" W x 12" D x 36" H (approx.)
Accessory Hooks	Included for hanging small items
Non-Slip Surface	Textured shelf surfaces prevent items from sliding

Package Contents

Unpack and verify all parts before assembly.

Main vertical panels (2 pieces)
Adjustable shelves (4 pieces)
Dividers (6 pieces)
Mounting brackets (2 sets)
Wall anchors and screws
Plastic connectors (12 pieces)
Hooks (8 pieces)
Assembly manual (this document)

WARNING! Check for damaged parts before assembly. Contact IKEA for replacements if needed.

Safety Instructions

Follow these instructions to ensure safe assembly and use.

Assemble on a soft surface to avoid scratching components.
Use two people for assembly to prevent injury.
Ensure wall mounting is done on studs or using provided anchors for drywall.
Do not exceed the maximum weight capacity of 15 lbs per shelf.
Keep away from direct heat sources and moisture.
Do not allow children to climb on the organizer.

CAUTION! Improper installation may cause the unit to tip over, resulting in injury.

Assembly Instructions

Prepare Workspace: Clear an area large enough to lay out all parts.
Connect Vertical Panels: Align the two main panels and insert plastic connectors at top, middle, and bottom.
Install Shelves: Slide shelves into desired slots until they click into place.
Add Dividers: Insert dividers into shelf grooves for compartmentalization.
Attach Hooks: Snap hooks onto the front edge of shelves or vertical panels.
Verify Stability: Ensure all connections are secure and shelves are level.

Tip: Refer to the numbered diagrams on the manual pages for visual guidance.

Installation & Placement

For wall-mounted installation:

Locate wall studs using a stud finder.
Hold the assembled unit against the wall at desired height.
Mark screw holes through mounting brackets.
Drill pilot holes at marked locations.
Secure mounting brackets to wall using provided screws and anchors.
Hang the organizer onto the brackets until it locks in place.
Test stability by gently pulling forward.

Note: For free-standing use, ensure the unit is on a level surface away from high-traffic areas.

Usage Guidelines

Distribute weight evenly across shelves.
Use hooks for lightweight items like keys, tools, or accessories.
Adjust shelf heights to accommodate items of different sizes.
Utilize dividers to separate and categorize stored items.
Do not place heavy electronics or liquids without proper support.
The organizer is suitable for garage, closet, office, or entryway use.

Maintenance & Cleaning

Regular maintenance ensures longevity.

Wipe surfaces with a soft, dry cloth for routine cleaning.
For stubborn stains, use a damp cloth with mild soap solution.
Dry immediately after cleaning with a wet cloth.
Periodically check and tighten connectors and mounting hardware.
Avoid abrasive cleaners or solvents that may damage the finish.

CAUTION! Do not use steam cleaners or high-pressure water jets.

Specifications

Model: BAXNA 404.743.65
Color: Various (as purchased)
Material: Steel, Plastic
Weight: 18.5 lbs (8.4 kg) unloaded
Dimensions (Assembled): 24" W x 12" D x 36" H (61cm x 30.5cm x 91.5cm)
Shelf Capacity: 15 lbs (6.8 kg) each
Warranty: 10-year limited warranty
Country of Origin: Designed and quality tested by IKEA

Warranty Information

IKEA offers a 10-year limited warranty on this product against manufacturing defects under normal household use. The warranty does not cover damage from improper assembly, accidents, modification, or commercial use. Proof of purchase is required. For warranty claims, contact your local IKEA store or visit www.IKEA.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Shelves not secure	Connectors not fully inserted	Remove shelf and re-insert until audible click is heard.
Unit wobbles	Uneven floor or loose wall mounting	Check floor level; tighten all mounting screws and connectors.
Hooks not staying in place	Not snapped onto correct edge	Ensure hook is fully seated on the shelf or panel lip.
Scratches on surface	Assembly on hard surface	Assemble on carpet or cardboard; minor scratches can be touched up with matching paint.
Cannot adjust shelf height	Shelves locked in place	Lift shelf slightly to release locking mechanism before sliding.
Parts missing	Packaging error	Contact IKEA customer service with product number and receipt.

Reassembly: If moving, disassemble in reverse order and keep all parts together.

Customer Service: Visit www.IKEA.com or call 1-800-434-4532 (US).