IKEA BAROMETER 703.646.38 Ceiling Lights instructions manual

The IKEA BAROMETER 703.646.38 is a stylish and functional ceiling light fixture designed for easy installation and energy-efficient lighting. It features a modern design suitable for various room settings, uses LED technology for long-lasting illumination, and includes all necessary mounting hardware. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Installation Instructions 5. Electrical Connection 6. Mounting the Fixture 7. Bulb Replacement 8. Operation & Settings 9. Care & Cleaning 10. Troubleshooting 11. Specifications & Warranty

Features at a Glance

Key components: Ceiling mount plate, Light fixture body, LED module, Mounting screws, Wire connectors, Instruction manual.

Feature	Description
Design	Modern, minimalist ceiling light with diffuser
Light Source	Integrated LED module (non-replaceable)
Power Consumption	Energy efficient, low wattage
Color Temperature	Warm white (2700K-3000K)
Mounting Type	Ceiling mounted, suitable for standard junction boxes
Dimmable	Compatible with leading-edge and trailing-edge dimmers (if specified)
IP Rating	IP20 - for indoor use only
Material	Plastic/acrylic diffuser, metal/plastic body
Certifications	CE, RoHS compliant
Warranty	Limited warranty as per IKEA policy

Safety Information

Read all instructions before installation and keep for future reference.

Ensure power is turned OFF at the circuit breaker before installation.
Installation should be performed by a qualified electrician if you are unsure.
Do not install near heat sources or in damp locations (not suitable for bathrooms unless specified).
Use only with the specified voltage (e.g., 120V/230V).
Do not modify the fixture or use incompatible parts.

WARNING! Risk of electric shock. Disconnect power before installation or maintenance.

Package Contents

Unpack and verify all parts are included.

1 x Ceiling light fixture
1 x Mounting plate
2-4 x Mounting screws
2 x Wire connectors (wire nuts)
1 x Instruction manual
Optional: Screw anchors for concrete ceilings

CAUTION! Check for any damage before installation. Contact IKEA if parts are missing.

Installation Instructions

Follow these steps for safe and correct installation.

Turn off power at the circuit breaker.
Remove existing light fixture (if any).
Attach mounting plate to the ceiling junction box using provided screws.
Connect wires: Match fixture wires to house wires (Live to Live, Neutral to Neutral, Ground to Ground) using wire connectors.
Secure fixture to mounting plate as per design (snap, twist, or screw).
Install appropriate bulbs if not integrated LED.
Restore power and test the light.

Tip: Use a voltage tester to confirm power is off before touching wires.

Electrical Connection

Proper wiring is crucial for safety.

Wire Color (Fixture)	Connection To (House)
Brown/Black (Live)	Black/Live wire
Blue/White (Neutral)	White/Neutral wire
Green/Yellow (Ground)	Green/Bare ground wire

Note: If house wiring is different (e.g., red for live), consult an electrician.

Mounting the Fixture

Specific steps for BAROMETER 703.646.38 model.

Hold mounting plate against ceiling, aligning with junction box holes.
Secure plate with screws (included).
Connect wires as per section 6.
Position fixture body against plate and rotate clockwise until it locks (or secure with screws).
Ensure fixture is firmly attached and does not wobble.

WARNING! Do not overtighten screws to avoid damaging the fixture.

Bulb Replacement

For models with replaceable bulbs (if applicable).

Turn off power and allow bulb to cool if recently used.
Gently twist bulb counterclockwise to remove.
Insert new bulb of correct type and wattage (see specifications).
Twist clockwise until secure.
Restore power and test.

Note: For integrated LED models, the entire module may need replacement if faulty (contact IKEA).

Operation & Settings

Using your ceiling light.

Control via wall switch (standard on/off).
If dimmable, use compatible dimmer switch for adjustable brightness.
No additional settings or remote control unless specified.

Tip: For dimming issues, ensure dimmer is compatible with LED loads.

Care & Cleaning

Turn off power and let fixture cool before cleaning.

Use a dry, soft cloth to wipe the diffuser and body.
For stubborn dirt, use a damp cloth with mild soap, then dry immediately.
Do not use abrasive cleaners, solvents, or chemicals.
Avoid spraying liquids directly onto the fixture.

CAUTION! Do not immerse in water or clean with harsh substances.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power off, loose connection, faulty bulb	Check circuit breaker; ensure wires are connected; replace bulb if applicable.
Light flickers	Loose connection, incompatible dimmer, voltage issue	Check wiring; use compatible dimmer; consult electrician.
Dim light or uneven brightness	Old/dying bulb, voltage drop	Replace bulb; check household voltage.
Fixture feels hot	Overwattage bulb, poor ventilation	Use correct wattage; ensure fixture is not covered.
Buzzing/humming sound	Dimmer compatibility, transformer issue	Change dimmer; check for faulty driver (LED models).

Reset: For smart models, follow reset instructions in separate guide.

Specifications & Warranty

Model: BAROMETER 703.646.38
Input Voltage: 120V AC, 60Hz (or 230V, 50Hz depending on region)
Power: XX watts (LED equivalent to XXW incandescent)
Luminous Flux: XXX lumens
Color Temperature: 2700K (Warm White)
CRI: >80
Dimensions: Diameter XX cm, Height XX cm
Weight: X.X kg
Warranty: X years limited warranty from IKEA
Support: Contact IKEA customer service or visit www.ikea.com

Disposal: Dispose of according to local electronic waste regulations.