IKEA BARKASS 205.183.32 Lighting instructions manual

The IKEA BARKASS 205.183.32 is a modern lighting fixture designed for home use, featuring energy-efficient LED technology, adjustable brightness settings, multiple color temperatures, and a sleek Scandinavian design. It includes a remote control for convenient operation, a built-in timer function, and compatibility with standard household voltage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Remote Control 8. Smart Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED light panel, Remote Control, Power adapter, Mounting bracket, Wall plug.

Feature	Description
LED Panel	Energy-efficient, long-lasting light source
Remote Control	Wireless control for brightness and color temperature
Power Adapter	Converts AC to DC for safe operation
Mounting Bracket	For secure wall or ceiling installation
Wall Plug	Standard power connection
Brightness Control	Adjustable from 10% to 100% intensity
Color Temperature	Switch between Warm White, Cool White, and Daylight
Timer Function	Auto-off after set period (30 min, 60 min, 120 min)
Memory Function	Remembers last used settings
Power Indicator	LED shows operational status

Installation

Unpack and inspect contents. Ensure all parts are present.

Choose location: Select stable wall or ceiling surface away from heat sources.
Mount bracket: Use included screws to secure bracket to surface.
Attach light panel: Align panel with bracket and secure with locking mechanism.
Connect power: Plug adapter into wall outlet, then connect to light fixture.

WARNING! Ensure power is turned off during installation. Do not exceed maximum load capacity.

First-Time Setup

Power on light; follow initial configuration.

Pair remote: Press and hold POWER button on remote for 3 seconds until indicator flashes.
Set default brightness: Use +/- buttons to adjust to preferred level.
Select color temperature: Cycle through options using COLOR button.
Configure timer: Press TIMER to set auto-off duration.

CAUTION! Keep remote within 5 meters for reliable operation. Avoid direct sunlight on sensor.

Specifications

Model: BARKASS 205.183.32
Light Source: LED, 6000K max
Brightness: Adjustable 300-1500 lumens
Power Consumption: 15W max
Input Voltage: 100-240V AC, 50/60Hz
Color Temperature: 2700K (Warm), 4000K (Cool), 6500K (Daylight)
Dimensions: 400mm x 300mm x 25mm
Weight: 1.2 kg
Operating Temp: 0°C to 40°C
Warranty: 2 years limited

Controls and Settings

Access controls via remote or manual buttons on fixture. Manual Controls: POWER, BRIGHTNESS +/-, COLOR.

Remote: POWER, BRIGHTNESS +/-, COLOR, TIMER, MEMORY, RESET.

Brightness: Adjust in 10% increments from 10% to 100%. Color Temperature: Cycle through Warm White, Cool White, Daylight. Timer: Set for 30, 60, or 120 minutes auto-off. Memory: Saves last brightness and color setting. Reset: Hold POWER + COLOR for 5 seconds to restore factory defaults.

Connecting to Power

Use included power adapter and wall plug.

Ensure light switch is off before connecting.
Insert wall plug into grounded outlet.
Connect adapter cable to light fixture input port.
Turn on power switch to activate.

Tip: Use surge protector for added safety. Do not overload circuit.

Using Remote Control

Remote operates up to 5 meters away.

Power: Press to turn light on/off.
Brightness: Use +/- to increase/decrease intensity.
Color: Press to cycle through temperature options.
Timer: Select duration for auto-shutoff.
Memory: Press to save current settings.
Reset: Hold for 3 seconds to clear custom settings.

WARNING! Replace batteries when remote becomes unresponsive. Use AAA batteries only.

Smart Features

Timer Function: Auto-off after set time. Memory Function: Retains preferences after power cycle. Energy Saving Mode: Automatically reduces brightness after 30 minutes of inactivity.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemical cleaners.

CAUTION! Do not immerse in water. Avoid abrasive materials that may scratch surface.

Regulatory Information

CE Certified: Complies with European safety standards. RoHS Compliant: Free of hazardous substances. Energy Class: A+ rating. For support, visit www.ikea.com or contact IKEA customer service at 1-800-434-4532. Copyright © 2023 IKEA. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light not turning on	Power connection	Check wall outlet; ensure adapter is properly connected; verify power switch is on.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear line of sight to sensor; stay within 5m range.
Flickering light	Loose connection	Secure all connections; try different outlet; check for voltage fluctuations.
Color not changing	Remote pairing	Re-pair remote by holding POWER for 5 seconds; reset to factory defaults.
Timer not functioning	Settings	Reconfigure timer settings; ensure memory function is not overriding.

Reset: Hold POWER + COLOR buttons for 10 seconds to factory reset.

Service: 1-800-434-4532; www.ikea.com