IKEA AXSTAD 004.683.90 Cover Panel instructions manual

The IKEA AXSTAD 004.683.90 is a cover panel designed for kitchen cabinets, part of the AXSTAD series. It is used to conceal the space between wall cabinets and the ceiling, providing a finished look. This manual covers safety information, product overview, installation steps, care instructions, and troubleshooting. Ensure you read all instructions before beginning installation.

1. Product Overview 2. Included Parts 3. Tools Required 4. Safety Information 5. Pre-Installation Checklist 6. Installation Steps 7. Adjustments & Alignment 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Product Overview

The AXSTAD cover panel is a pre-finished panel that mounts above wall cabinets to close the gap to the ceiling. It enhances the kitchen's appearance by creating a seamless transition.

Feature	Description
Material	Particleboard with melamine foil finish
Color/Finish	White, high-gloss
Dimensions	Varies by model; check packaging for exact size
Weight	Lightweight for easy handling
Compatibility	Designed for AXSTAD wall cabinets
Mounting	Attaches to cabinet frames with screws

Included Parts

Open the package and verify all parts are present before starting.

Cover panel (1 piece)
Mounting brackets (quantity as specified on package)
Screws (for attaching brackets to cabinet and panel)
Instruction manual (this document)

Note: If any part is missing or damaged, contact IKEA customer service.

Tools Required

You will need the following tools (not included):

Phillips screwdriver or cordless drill with Phillips bit
Measuring tape
Pencil
Level
Safety glasses (recommended)

Safety Information

Follow these safety guidelines to prevent injury and damage.

Work with a partner: The panel may be awkward to handle alone.
Wear safety glasses when drilling or screwing.
Ensure cabinets are securely mounted to the wall before attaching the cover panel.
Keep tools and screws away from children.
Do not stand on cabinets or the cover panel.

WARNING! Improper installation can cause the panel to fall, resulting in injury or damage. Always follow instructions.

Pre-Installation Checklist

Before installation, ensure the following:

Wall cabinets are level and securely attached to wall studs.
Ceiling is level; measure gap to ensure panel will fit.
Clear workspace of obstacles.
Have all tools and parts ready.
Read through all installation steps.

Installation Steps

Follow these steps to install the cover panel.

Position brackets: Hold mounting brackets against the top of the wall cabinet frame. Mark screw holes with a pencil.
Attach brackets: Drill pilot holes if necessary, then screw brackets to cabinet frame using provided screws. Ensure brackets are level and evenly spaced.
Measure and mark panel: Place panel on brackets to check fit. Mark any areas that need trimming (if required for your kitchen layout).
Attach panel: With help, lift panel onto brackets. Align panel with cabinet front. Secure panel to brackets using provided screws from underneath or inside the cabinet.
Check alignment: Use a level to ensure panel is straight. Adjust brackets if needed.

Tip: Do not overtighten screws to avoid damaging the panel material.

Adjustments & Alignment

If the panel does not align properly, make these adjustments:

Panel not level: Loosen bracket screws, adjust panel, then retighten.
Gap at ceiling: If the ceiling is uneven, you may need to trim the panel or add molding (not included).
Panel too long/short: The panel is designed for standard installations. For custom lengths, contact IKEA for cutting instructions or alternative solutions.

Care & Maintenance

To keep the cover panel looking new:

Clean with a soft, damp cloth. Use mild soap if needed.
Do not use abrasive cleaners, scouring pads, or harsh chemicals.
Avoid excessive moisture; wipe spills immediately.
Do not place heavy objects on the panel.

CAUTION! The high-gloss finish can scratch easily. Handle with care during cleaning.

Troubleshooting

Issue	Possible Cause	Solution
Panel sags or is loose	Brackets not securely attached	Check bracket screws; tighten or relocate to wall studs.
Gap between panel and ceiling	Uneven ceiling or incorrect panel size	Measure gap; consider adding trim or adjusting panel height.
Scratches on finish	Improper handling or cleaning	Use soft cloths; avoid abrasive materials. Scratches may be concealed with touch-up paint (not included).
Panel does not fit cabinets	Wrong model or cabinets not level	Verify model number; ensure cabinets are level and properly installed.
Screws not holding	Drilling into unsuitable material	Use wall anchors if not attaching to studs; ensure screws are correct length.

Warranty & Support

This IKEA product is covered by the IKEA warranty. Refer to the IKEA warranty document for terms and conditions.

For assistance:

Visit the IKEA website: www.ikea.com
Contact IKEA customer service: 1-888-888-4532
Visit your local IKEA store for support.

Note: Keep your receipt as proof of purchase for warranty claims.