IKEA AURDAL 193.315.33 Drawer instructions manual

The IKEA AURDAL 193.315.33 is a drawer unit designed for the AURDAL wardrobe system, featuring a modern design, smooth-gliding runners, and durable construction. It is intended for indoor use with the AURDAL frame and requires assembly. Below are key sections for safety, parts overview, step-by-step assembly, installation into the frame, usage, care, and troubleshooting.

Parts & Tools Overview

Key components included in the package: Drawer front panel, drawer sides, drawer back panel, drawer bottom panel, runner assemblies, screws, cam locks, and dowels.

Tools required: Phillips screwdriver, hammer (for tapping dowels), measuring tape (optional).

Safety Instructions

Read all instructions before assembly. Ensure a clean, flat workspace.

1. Keep small parts away from children to avoid choking hazards.
2. Assemble on a soft surface (e.g., carpet or cardboard) to prevent scratching.
3. Use correct tools; do not overtighten screws.
4. Check that all connections are secure before loading the drawer.
5. Do not exceed the maximum load capacity (see Specifications).

WARNING! The drawer must be properly installed into the AURDAL frame. An improperly installed drawer may fall out, causing injury or damage.

Step-by-Step Assembly

Follow these steps to assemble the drawer box before installing runners.

1. Attach sides to front: Insert dowels from the cam lock sets into the holes on the inner side of the drawer front. Align the side panels and tighten the cam locks with a screwdriver (quarter turn).
2. Attach back panel: Connect the back panel to the side panels using the remaining cam locks and dowels.
3. Insert bottom panel: Slide the fibreboard bottom panel into the grooves on the side, front, and back panels from the top. It should sit flush.
4. Secure bottom (optional): Use two screws (from pack) to secure the bottom to the back panel if pre-drilled holes exist.
5. Attach runners: Fix the runner assemblies to the outer sides of the drawer using the provided screws. Ensure they are parallel and at the same height.

Tip: Do not fully tighten screws until all parts are aligned.

Installation into AURDAL Frame

Once the drawer box is assembled, install it into the prepared AURDAL wardrobe frame.

1. Ensure the frame is level and securely anchored to the wall.
2. Extend the drawer runners fully on both sides of the frame interior.
3. Align the drawer’s runners with the frame runners and push gently until they click into place.
4. Test the drawer by pulling it out and pushing it in several times. It should glide smoothly without catching.
5. If needed, adjust the runner height using the adjustment screws on the side of the frame runners.

CAUTION! Ensure the frame is stable and can support the drawer’s weight when loaded.

Adjustments & Usage

After installation, you can make minor adjustments for optimal performance.

• Alignment: If the drawer is uneven, use a screwdriver to adjust the screws on the runners (front/back, up/down).
• Smooth operation: If the drawer sticks, check for obstructions and ensure runners are clean and parallel.
• Loading: Distribute weight evenly. Avoid placing extremely heavy items at the front edge.
• Child safety (optional): IKEA offers optional child safety locks that can be installed on the drawer front.

Care & Maintenance

To ensure long-lasting performance, clean and maintain the drawer properly.

1. Wipe the exterior and interior with a damp cloth and mild detergent. Dry immediately.
2. Avoid abrasive cleaners or solvents that may damage the surface.
3. Periodically check the runners for dust or debris and clean with a dry cloth.
4. Tighten any loose screws or cam locks as needed.

CAUTION! Do not use excessive water when cleaning, especially on the fibreboard bottom panel.

Specifications

• Product Name: AURDAL Drawer unit
• Article Number: 193.315.33
• Color: White
• Material: Particleboard, Fibreboard, Plastic, Steel
• Dimensions (W x H x D): 60 cm x 20 cm x 58 cm (approx.)
• Maximum Load Capacity: 15 kg (33 lbs)
• Compatible Frame: IKEA AURDAL wardrobe frame
• Weight (net): 5.2 kg
• Package Includes: All necessary parts and hardware for one drawer.

Warranty & Support

This IKEA product is covered by the IKEA limited warranty. Refer to the IKEA warranty document for terms and conditions.

For assembly support, missing parts, or product questions:

• Visit the IKEA website: www.ikea.com
• Contact IKEA customer service: 1-800-434-4532 (US)
• Use the IKEA app for digital assembly instructions.

Note: Keep your receipt as proof of purchase for warranty claims.

Troubleshooting

Replacement Parts: For missing or damaged parts, contact IKEA customer service with the article number (193.315.33).