IKEA ASKERSUND 803.318.50 Deco Strip instructions manual

The IKEA ASKERSUND 803.318.50 Deco Strip is a decorative LED lighting strip designed for ambient illumination. It features a flexible design, energy-efficient LED technology, adhesive backing for easy mounting, a low-voltage power supply, and a simple plug-and-play setup. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Mounting & Placement 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Flexible LED strip, Power adapter, Adhesive backing, Connector cable.

Feature	Description
Flexible LED strip	Bendable design for contour mounting
Adhesive backing	Pre-applied tape for easy attachment to clean, dry surfaces
Low-voltage power adapter	Plugs into standard wall outlet; converts to safe operating voltage
Plug-and-play connector	Simple connection between strip and power supply
Energy-efficient LEDs	Long lifespan and low power consumption

Installation

Unpack and inspect contents. Ensure mounting surface is clean, dry, and smooth.

Plan layout: Decide where to place strip. Ensure strip length and power adapter reach outlet.
Prepare surface: Clean area with mild cleaner, dry thoroughly.
Connect power: Plug adapter into wall outlet, connect to strip via cable (do not mount yet).
Test function: Verify LEDs illuminate properly before final mounting.

WARNING! Do not cut, pierce, or modify the LED strip. Ensure power adapter is not covered or placed near heat sources.

First-Time Setup

After testing, proceed with permanent mounting.

Peel backing: Remove protective liner from adhesive backing on strip.
Align and press: Carefully align strip to planned location and press firmly along entire length.
Secure connection: Ensure connector cable is firmly attached and not strained.
Manage cables: Use clips or ties to neatly route excess cable to power outlet.

CAUTION! Adhesive is strong; ensure correct placement before pressing down. Do not attempt to reposition once fully adhered.

Specifications

Product Code: 803.318.50
Type: ASKERSUND Deco Strip
Light Source: Integrated LEDs
Power Supply: Low-voltage adapter (Input: 100-240V AC, 50/60Hz)
Length: As per packaging (e.g., 1 meter / 3.3 feet)
Color Temperature: Warm white (e.g., 2700K)
Mounting: Adhesive backing
Operating Environment: Indoor use only

Controls and Settings

The Deco Strip has no user controls on the strip itself. Operation is managed via the power source.

Power On/Off: Plug or unplug the power adapter from the wall outlet, or use a switched outlet/power strip.

Note: This is a single-state, always-on light when powered. It does not feature dimming or color change functions.

Connecting to Power

Use only the provided IKEA power adapter.

Ensure the strip connector and adapter connector are clean and dry.
Align connectors and push together firmly until fully seated.
Plug the power adapter into a standard wall outlet.
The LED strip should light up immediately.

Tip: Do not use extension cords unless necessary. If used, ensure it is rated for the product's power requirements.

Mounting & Placement

Ideal for under cabinets, shelves, display cases, or as accent lighting.

Surface Compatibility: Mount only on smooth, non-porous surfaces like finished wood, metal, glass, or painted drywall.
Avoid: Textured surfaces, wallpaper, fabrics, or areas with high moisture (e.g., inside bathrooms unless specified).
Bending: The strip can be bent gently to follow curves. Do not bend sharply (less than 2-inch radius).
Heat Dissipation: Do not cover the strip with insulating materials. Allow for air circulation.

WARNING! Never mount the strip on or near heating elements, stoves, or other high-temperature appliances.

Care & Cleaning

Unplug from power before any cleaning.

Use a dry, soft cloth to gently dust the LED strip and power adapter.
For smudges, slightly dampen cloth with water only. Wring out thoroughly.
Wipe gently and immediately dry with a second clean, dry cloth.

CAUTION! Do not use chemical cleaners, solvents, or abrasives. Do not immerse any part in water.

Regulatory Information

This product complies with applicable CE directives and standards for electrical safety and electromagnetic compatibility (EMC). The crossed-out wheelie bin symbol indicates separate collection of electrical waste. Dispose of according to local regulations. For IKEA product support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Strip does not light up	No power / Loose connection	Check if outlet is live; ensure adapter is fully plugged in; check connection between strip and cable.
Partial lighting	Damaged strip or connection	Inspect strip for physical damage. Ensure connector is fully inserted. Contact IKEA support if damaged.
Strip falls off	Surface not prepared / Low temperature	Re-mount on a properly cleaned, dry, warm surface. Adhesive works best above 10°C (50°F).
Flickering lights	Loose connection / Faulty adapter	Check all connections. Try a different wall outlet. If problem persists, adapter may be faulty.
Adapter is warm	Normal operation / Overloaded	Some warmth is normal. If it becomes hot to the touch, unplug immediately and contact support.

Replacement: The LED strip and power adapter are not user-serviceable. Do not attempt to repair.

Service: For warranty and support, contact IKEA customer service or visit www.ikea.com.