IKEA ASKERSUND 203.483.49 Cover Panel instructions manual

The IKEA ASKERSUND 203.483.49 Cover Panel is a component designed for IKEA kitchen cabinet systems, specifically to conceal the sides of cabinets or appliances for a clean, integrated look. It is made from particleboard with a foil finish, is pre-drilled for mounting, and is compatible with various ASKERSUND and SEKTION cabinet frames. Below are key sections for safety, features, parts included, installation, care, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Tools Required 4. Installation Instructions 5. Mounting & Adjustment 6. Compatibility 7. Care & Cleaning 8. Safety Information 9. Specifications 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Pre-finished panel, mounting brackets, screws, and installation template.

Feature	Description
Material	Particleboard with foil finish
Finish	White, Ash effect, or other IKEA finishes
Pre-drilled holes	For easy mounting to cabinet frames
Mounting brackets	Included for secure attachment
Compatibility	Designed for ASKERSUND/SEKTION system
Function	Conceals cabinet sides and appliances
Edge banding	PVC edge for durability
Weight capacity	Designed for static load only
Adjustability	Minor adjustments possible during installation
Packaging	Flat-pack for easy transport

Parts Included

Unpack and verify all parts before starting installation.

Cover Panel (1 piece)
Mounting brackets (2-4 pieces depending on size)
Screws (8-12 pieces)
Installation template/guide (1 sheet)
Cam locks or connectors (if required for your system)

WARNING! Do not discard packaging until all parts are verified. Missing parts? Contact IKEA customer service.

Tools Required

Gather these tools before beginning installation.

Phillips screwdriver (size #2)
Drill (optional, for pre-drilling if needed)
Level
Tape measure
Pencil for marking
Hammer (for tapping brackets if necessary)

CAUTION! Use appropriate safety gear when using tools.

Installation Instructions

Step 1: Position the cabinet frame or appliance where the cover panel will be installed.
Step 2: Hold the cover panel against the side of the cabinet to check fit.
Step 3: Use the installation template to mark screw hole positions on the cabinet frame.
Step 4: Attach mounting brackets to the cabinet frame using provided screws.
Step 5: Lift the cover panel and hook it onto the mounting brackets.
Step 6: Secure the panel by tightening screws through the pre-drilled holes into the brackets.
Step 7: Check alignment with a level and adjust if necessary.
Step 8: Ensure all screws are tightened securely.

Mounting & Adjustment

For optimal results, follow these adjustment tips.

Alignment: Use a level to ensure the panel is vertical. Loosen screws slightly to adjust, then retighten.

Gap adjustment: If there are gaps between panels, check that the cabinet frame is level and square. Adjust the frame before finalizing panel installation.

Bracket positioning: Brackets can be moved within the pre-drilled holes for fine-tuning panel position.

Compatibility

This cover panel is designed for specific IKEA systems.

Compatible with ASKERSUND cabinet frames.
Compatible with SEKTION kitchen system frames of corresponding dimensions.
Can be used to cover sides of refrigerators, dishwashers, or other appliances when used with appropriate filler panels.
Check IKEA website or catalog for exact compatibility with your cabinet model.

Tip: Measure your cabinet frame before purchase to ensure correct panel size.

Care & Cleaning

To maintain appearance and longevity.

Use a soft, damp cloth with mild detergent for cleaning.
Wipe dry immediately after cleaning.
Do not use abrasive cleaners, scouring pads, or harsh chemicals.
Avoid excessive moisture; do not soak the panel.
For stubborn stains, use a mild soap solution and rinse with clean water.

WARNING! Do not use wax, polish, or silicone-based products as they may damage the finish.

Safety Information

Important safety precautions for installation and use.

Installation: Ensure the cabinet frame is securely mounted to the wall before attaching the cover panel. The panel is not structural and should not bear weight.

Children: Do not allow children to climb or hang on the panel.

Weight: Do not place heavy objects against the panel.

Specifications

Article Number: 203.483.49
Dimensions: Varies by size (check packaging for exact W x H x D)
Material: Particleboard, foil, ABS edge banding
Weight: Approximately 3-5 kg depending on size
Color: White, Ash effect, or other finishes
Load Capacity: For covering only, not for storage
Warranty: Refer to IKEA warranty terms
Origin: Designed by IKEA

Warranty & Support

IKEA limited warranty applies. For support, visit www.ikea.com or contact your local IKEA store.

Note: Warranty does not cover damage from improper installation, misuse, or unauthorized modifications.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Panel doesn't fit	Wrong size or cabinet not level	Verify panel dimensions; check cabinet frame is square and level.
Gaps between panels	Improper alignment or mounting	Loosen screws, adjust panel position, retighten.
Panel feels loose	Screws not tightened or brackets not secure	Check all screws are tight; ensure brackets are properly attached to frame.
Difficulty attaching brackets	Pre-drilled holes misaligned	Use a drill to create new pilot holes if necessary.
Finish damaged during installation	Tools scratched surface	Use protective cloth between tools and panel; handle with care.

Professional Installation: If unsure, consider IKEA assembly service.

Contact: IKEA customer service: 1-888-888-4532 (US) or visit www.ikea.com