IKEA ANROPA 605.183.30 Lighting instructions manual

The IKEA ANROPA 605.183.30 is a modern LED lighting fixture designed for indoor use, featuring energy-efficient LED technology, adjustable brightness levels, multiple color temperature settings (warm white to cool white), and a sleek, minimalist design. It includes a remote control for convenient operation, a mounting kit for ceiling or wall installation, and is compatible with standard household voltage. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Installation 4. First-Time Setup 5. Specifications 6. Controls and Operation 7. Remote Control Functions 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LED light panel, Remote Control, Mounting bracket, Power adapter, User manual.

Feature	Description
LED Technology	Energy-efficient, long-lasting LED light source
Adjustable Brightness	Dimmable from 10% to 100% intensity
Color Temperature	Adjustable from 2700K (Warm White) to 6500K (Cool White)
Remote Control	Wireless control for on/off, brightness, and color temperature
Mounting Options	Ceiling or wall mount with included bracket
Power Input	AC 100-240V, 50/60Hz universal input
ON/OFF	Manual switch on the fixture and remote control
DIMMER	Adjusts light intensity
COLOR MODE	Cycles through preset color temperatures
MEMORY FUNCTION	Remembers last brightness and color setting

Safety Information

Read all instructions before installation and use.

Ensure power is turned OFF at the circuit breaker before installation.
This luminaire is for indoor use only. Do not use outdoors or in wet locations.
Use only with the provided power adapter. Do not modify the cord or plug.
Keep away from children. Small parts may pose a choking hazard.
Do not cover the light fixture or place objects on it during operation.

WARNING! Risk of electric shock. Installation should be performed by a qualified electrician if you are unsure. Do not disassemble the fixture.

Installation

Unpack and verify all parts. Choose mounting location (ceiling or wall).

Turn off power at the main circuit breaker.
Attach mounting bracket to ceiling or wall using provided screws and anchors.
Connect the light fixture's wires to the household wiring (Live, Neutral, Ground) as per local electrical codes. Secure with wire nuts.
Attach the light fixture to the mounting bracket and secure with provided screws.
Install the remote control batteries (2 x AAA, not included).
Restore power and test the light.

CAUTION! Ensure the fixture is securely mounted to support its weight. Do not overtighten screws.

First-Time Setup

After installation, pair the remote control and configure initial settings.

Power on the light using the wall switch or circuit breaker.
Point the remote at the light fixture (within 5 meters/16 feet).
Press and hold the ON button on the remote for 3 seconds until the light blinks once to confirm pairing.
Adjust brightness: Use the "+" and "-" buttons on the remote.
Adjust color temperature: Press the COLOR MODE button to cycle through options.
The fixture will remember your last setting when turned off and on.

Tip: For optimal performance, ensure no obstructions between the remote and the fixture's IR receiver.

Specifications

Model: ANROPA 605.183.30
Light Source: Integrated LED
Power Consumption: 18W (equivalent to 150W incandescent)
Luminous Flux: 1600 lumens
Color Temperature: Adjustable 2700K - 6500K
CRI (Color Rendering Index): >80
Dimming: 10% - 100% via remote
Input Voltage: AC 100-240V, 50/60Hz
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Dimensions: 400mm x 400mm x 25mm (15.7" x 15.7" x 1")
Weight: 1.8 kg (4 lbs)

Controls and Operation

Fixture: Manual power switch (on/off). Remote Control: Primary interface for all functions.

Remote Functions: POWER ON/OFF, Brightness +/-, COLOR MODE, MEMORY, RESET.

Brightness Control: Press "+" to increase, "-" to decrease. Hold for rapid adjustment. Color Temperature: Press COLOR MODE to cycle: Warm White (2700K) → Neutral White (4000K) → Cool White (6500K). Memory Function: Automatically saves the last used brightness and color setting. Reset: Press and hold POWER and COLOR MODE for 5 seconds to restore factory defaults (full brightness, 4000K).

Remote Control Functions

Detailed guide for remote control operation.

Ensure remote has fresh batteries and is pointed at the fixture.
Power: Turns light on or off.
Brightness +: Increases light intensity in steps.
Brightness -: Decreases light intensity in steps.
Color Mode: Cycles through three preset color temperatures.
Memory: Saves current setting (automatic on power off).
Reset: Restores factory settings (see above).

Note: Remote control range is up to 5 meters (16 feet) with direct line of sight.

Maintenance & Cleaning

Turn off power and allow the fixture to cool before cleaning.

Use a soft, dry cloth to wipe the surface. For stubborn dirt, use a slightly damp cloth.
Do not use abrasive cleaners, solvents, or chemicals.
Do not spray liquids directly onto the fixture.
Check and tighten mounting screws annually to ensure security.
Replace the remote control batteries when response becomes weak.

CAUTION! Never immerse the fixture or remote in water. Do not attempt to repair or replace integrated LEDs; contact support.

Regulatory Information

This product complies with relevant EU directives and standards for electrical safety and electromagnetic compatibility (EMC). The crossed-out wheelie bin symbol indicates separate collection for electrical and electronic equipment. For disposal, follow local regulations. IKEA and ANROPA are trademarks of Inter IKEA Systems B.V. For support, visit www.ikea.com or contact your local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	No power / Remote not paired	Check circuit breaker and wall switch. Re-pair remote (hold ON for 3 sec).
Remote does not work	Dead batteries / Obstructions	Replace batteries. Ensure direct line of sight to fixture within 5m.
Light flickers	Loose connection / Dimmer incompatibility	Check all wiring connections. This fixture is self-dimming; do not use with external dimmers.
Incorrect color/brightness	Settings changed / Memory issue	Adjust with remote. Reset to factory defaults (POWER+COLOR MODE 5 sec).
Buzzing sound	Electrical issue / Faulty component	Turn off and check wiring. If persists, discontinue use and contact support.

Reset: Use remote POWER+COLOR MODE reset as described.

Service: Contact IKEA customer support or visit www.ikea.com for warranty and repair information.