IKEA ANKARSPEL 704.943.43 Work Lamp instructions manual

The IKEA ANKARSPEL 704.943.43 is a modern, adjustable work lamp designed for focused task lighting. It features a flexible gooseneck arm for precise positioning, an energy-efficient LED light source with adjustable brightness, a stable weighted base, and an on/off switch with touch dimmer control. Suitable for desks, workbenches, or study areas. Below are key sections for safety, features, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Assembly Instructions 5. Specifications 6. Controls and Operation 7. Positioning and Use 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Adjustable gooseneck arm, LED light head, Weighted base, Touch dimmer control.

Feature	Description
Gooseneck Arm	Flexible arm for precise light direction and height adjustment
LED Light Source	Energy-efficient, long-life LED with adjustable brightness levels
Weighted Base	Provides stability on flat surfaces; prevents tipping
Touch Dimmer Control	On/Off and brightness adjustment via touch-sensitive switch
Power Input	Integrated power cord for standard wall outlet (120V AC)

Safety Information

Read all instructions before assembly and use.

Use only with specified power source (120V AC, 60Hz).
Place on a stable, flat surface to prevent falling.
Do not cover the lamp or place near heat sources.
Unplug before cleaning or when not in use for extended periods.
This lamp is not a toy. Keep away from children.

WARNING! Risk of electric shock. Do not disassemble the lamp. If damaged, discontinue use immediately.

Package Contents

Unpack and verify all parts are present.

1 x Lamp head with integrated LED and gooseneck arm
1 x Weighted base
1 x Power adapter unit (if applicable)
1 x Power cord
1 x Instruction manual (this sheet)
Note: Small parts are a choking hazard. Keep away from children.

Assembly Instructions

Assembly requires no tools. Follow steps in order.

Place the weighted base on a clean, flat surface.
Insert the end of the gooseneck arm into the socket on the base. Push firmly until it clicks into place.
Ensure the arm is securely attached and can move freely.
Plug the power cord into the port on the base, then plug the other end into a standard wall outlet.
The lamp is now ready for use.

CAUTION! Do not force parts during assembly. If parts do not fit, check orientation.

Specifications

Model: ANKARSPEL 704.943.43
Light Source: Integrated non-replaceable LED
Color Temperature: 4000K (Cool White)
Brightness: Adjustable, up to 600 lumens
Power Consumption: Max 7W
Input Voltage: 100-240V AC, 50/60Hz
Cord Length: 5 ft (1.5 m)
Base Diameter: 6 inches (15 cm)
Arm Reach: Adjustable up to 20 inches (50 cm) from base
Materials: Steel, plastic, weighted filler

Controls and Operation

Control is via a touch-sensitive area on the base or lamp head (model dependent).

To Turn On/Off: Tap the touch control once.

To Adjust Brightness: Touch and hold the control. Brightness will cycle from low to high and back. Release at desired level.

Note: The lamp may remember the last brightness setting when turned off and on again.

Positioning and Use

For optimal task lighting:

Position the base on your desk or work surface, ensuring it is stable.
Gently bend the gooseneck arm to direct the light onto your work area (e.g., keyboard, book, craft).
Avoid looking directly into the LED light source.
Adjust the brightness to suit the task and ambient light conditions.

Tip: Position the lamp so the light comes from the side opposite your writing hand to minimize shadows.

Care & Maintenance

Unplug the lamp from the wall outlet before cleaning.

Wipe the base, arm, and lamp head with a soft, dry cloth.
For stubborn marks, use a slightly damp cloth. Do not use abrasive cleaners or solvents.
Ensure the lamp is completely dry before plugging it back in.
Store in a dry place when not in use.

CAUTION! Do not immerse any part of the lamp in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Power outage	Ensure plug is firmly in wall outlet. Check other devices for power.
Light is dim or flickering	Touch control issue / Loose connection	Try turning off and on. Ensure arm is fully inserted into base.
Lamp is unstable	Base not on flat surface / Arm over-extended	Place on a flat, level surface. Reposition arm closer to base.
Touch control not responding	Surface dirty / Internal fault	Clean touch area with dry cloth. Unplug for 1 minute, then retry.
Unusual noise or smell	Electrical fault	IMMEDIATELY UNPLUG. Do not use. Contact support.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at IKEA stores.

For customer service, spare parts, or more information:
Visit: www.ikea.com
Contact your local IKEA store.
Have the model number (704.943.43) and date of purchase ready.

Recycling: Do not dispose of with household waste. Recycle according to local regulations for electronic equipment.