IKEA ANKARSPEL 404.943.49 Work Lamp instructions manual

The IKEA ANKARSPEL 404.943.49 is a versatile work lamp designed for focused task lighting. It features an adjustable arm and head for precise light direction, an energy-efficient LED light source, a stable base, and an on/off switch. Suitable for desks, workbenches, or craft areas. Below are key sections for safety, features, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Parts & Tools 3. Assembly Instructions 4. Specifications 5. Controls and Operation 6. Positioning & Adjustment 7. Safety Information 8. Care & Cleaning 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: Adjustable lamp head, Flexible gooseneck arm, Sturdy weighted base, On/off switch, Integrated LED module.

Feature	Description
Adjustable lamp head	Rotates and tilts to direct light precisely where needed
Flexible gooseneck arm	Allows for height and angle adjustment; holds position
Sturdy weighted base	Provides stability to prevent tipping
On/off switch	Located on the base or cord for easy access
Integrated LED module	Energy-efficient, long-lasting light source; non-replaceable
Power cord	Standard plug for 120V AC outlet

Parts & Tools

Unpack and verify all parts are included. No special tools required.

Lamp base (weighted)
Gooseneck arm
Lamp head with LED module
Mounting hardware (if applicable)
Power cord
Instruction manual

WARNING! Keep small parts away from children to avoid choking hazard.

Assembly Instructions

Follow steps in order. Ensure lamp is unplugged during assembly.

Place the weighted base on a flat, stable surface.
Attach the gooseneck arm to the base by screwing it into the provided socket. Hand-tighten securely.
Attach the lamp head to the top of the gooseneck arm. Ensure connection is firm.
Route the power cord from the base through the channel (if present) to keep it tidy.
Plug the power cord into a standard 120V AC outlet only after assembly is complete.

CAUTION! Do not overtighten connections. Do not force parts.

Specifications

Model: ANKARSPEL 404.943.49
Light Source: Integrated non-replaceable LED
Color Temperature: 4000K (Cool White)
Luminous Flux: 300 lumens
Power Consumption: 4W
Input Voltage: 120V AC, 60Hz
Cord Length: 5 ft (1.5 m)
Adjustability: 360° head rotation, flexible arm
Base Dimensions: 6-inch diameter
Weight: 2.2 lbs (1 kg)

Controls and Operation

Simple on/off control. No dimming function.

Operation: Press the switch on the base or cord to turn the lamp ON. Press again to turn OFF.

Adjustment: Gently bend the gooseneck arm to position the light. Rotate the lamp head to aim the light beam.

Note: The LED light source is designed to last for the lifetime of the product under normal use.

Positioning & Adjustment

For optimal task lighting and eye comfort.

Place the lamp on a stable surface to the side of your work area to avoid shadows.
Adjust the arm so the lamp head is approximately 12-18 inches from the work surface.
Tilt the head to avoid direct glare in your eyes. The light should illuminate your task, not your face.
Ensure the power cord is not in a walkway to prevent tripping.

Tip: Position the lamp so the light falls over your shoulder onto your work.

Safety Information

Read all instructions before use.

Use only with 120V AC, 60Hz power source.
Do not use outdoors or in damp locations.
Do not cover the lamp or place near heat sources.
Unplug before cleaning or when not in use for extended periods.
This lamp contains a non-user-serviceable LED light source. Do not attempt to disassemble or replace.
Do not bend the gooseneck arm excessively or use it as a handle to move the lamp.

WARNING! To reduce the risk of fire or electric shock, do not modify the cord or use with dimmer switches.

Care & Cleaning

Unplug the lamp and allow it to cool before cleaning.

Wipe the base, arm, and head with a soft, dry or slightly damp cloth.
Do not use abrasive cleaners, solvents, or chemicals.
Do not immerse any part of the lamp in water or other liquids.

CAUTION! Never spray liquids directly onto the lamp. Ensure it is completely dry before plugging in.

Warranty Information

This IKEA product is guaranteed under the terms of the IKEA commercial warranty. Refer to the IKEA warranty leaflet included with the product or visit www.ikea.com for details specific to your country.

For service or support, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Switch off / Faulty outlet	Ensure plug is fully inserted in a working outlet. Check the switch is ON. Try a different outlet.
Light is flickering	Loose connection	Check that the lamp head and arm are securely attached. Ensure plug is secure.
Lamp is unstable	Base not on flat surface / Arm over-extended	Place base on a flat, level surface. Reposition the arm to center the weight.
Arm does not hold position	Normal wear / Over-adjusted	Gently reposition. The arm may loosen slightly over time with extensive adjustment.
LED light is dim or off	End of product life	The integrated LED has reached the end of its functional life. The entire product must be replaced.

Recycling: Dispose of this product according to local electronic waste (e-waste) regulations. Do not dispose of with household waste.

Service: For non-warranty service, this product is not user-serviceable. Contact IKEA for support options.