IKEA ANKARSPEL 204.943.31 Floor Lamp instructions manual

The IKEA ANKARSPEL 204.943.31 is a modern floor lamp designed for ambient lighting. It features a stable base, an adjustable height pole, a fabric shade, and an integrated on/off switch. The lamp requires assembly and uses an E27 bulb (max 13W LED or equivalent, not included). Below are key sections for safety, parts list, assembly instructions, usage, care, and troubleshooting.

1. Parts & Tools Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Installation & Placement 6. Operation & Usage 7. Bulb Replacement 8. Care & Cleaning 9. Warranty Information 10. Troubleshooting

Parts & Tools Included

Before assembly, check that you have all parts listed below. Key components: Lamp base, adjustable pole sections, fabric shade, shade frame, lamp holder with switch, screws, and assembly tool.

Part Name	Quantity	Description
Lamp Base (Weighted)	1	Provides stability
Adjustable Pole Sections	3	Allows height adjustment
Fabric Shade	1	Diffuses light
Shade Frame	1	Holds shade in place
Lamp Holder with Switch	1	E27 socket and integrated on/off switch
Assembly Screws	4	For securing parts
Hex Key (Tool)	1	For tightening screws

Safety Information

Read all instructions before assembly and use.

Use only E27 bulb, max 13W LED or equivalent. Do not exceed wattage.
Ensure lamp is on a stable, level surface to prevent tipping.
Unplug lamp before assembly, cleaning, or bulb replacement.
Keep away from water, heat sources, and flammable materials.

WARNING! Risk of electric shock. Do not use if cord or plug is damaged. Do not modify plug. For indoor use only.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Follow steps in order.

Prepare Base: Place base on a soft surface to avoid scratches.
Attach Pole Sections: Insert the bottom pole section into the base. Tighten the securing screw with the hex key. Connect subsequent pole sections by twisting clockwise until firm.
Install Lamp Holder: Thread the cord through the top pole section. Attach the lamp holder to the top of the pole and secure with provided screws.
Attach Shade Frame: Slide the shade frame onto the lamp holder and lock into place.
Attach Fabric Shade: Open the fabric shade and fit it over the frame. Ensure it sits evenly and securely.
Final Check: Ensure all screws are tight and the lamp stands upright without wobbling.

CAUTION! Do not overtighten screws. Two people may be helpful for stability during assembly.

Specifications

Product Name: ANKARSPEL
Article Number: 204.943.31
Type: Floor Lamp
Material: Steel base and pole, Polyester fabric shade
Color: Black/White (as per variant)
Height (Adjustable): 140-160 cm (55-63 inches)
Bulb Socket: E27
Max Wattage: 13W LED or equivalent (Bulb not included)
Cord Length: 180 cm (71 inches)
Power Supply: 120V AC, 60Hz (for North America)
Weight: 3.5 kg (7.7 lbs)

Installation & Placement

Choose location carefully for optimal function and safety.

Place lamp on a firm, level floor away from foot traffic.
Ensure there is at least 30 cm (12 inches) clearance from walls or furniture.
Plug into a standard wall outlet. Do not use extension cords permanently.
Adjust pole height by loosening the locking mechanism, setting desired height, and retightening.

Tip: Position near a reading chair or in a room corner for ambient lighting.

Operation & Usage

Integrated switch on the lamp holder controls power.

Insert a compatible bulb (see Specifications).
Plug the cord into a wall outlet.
Use the switch on the lamp holder to turn the lamp ON/OFF.
Adjust the lamp height as needed by loosening the pole lock.

Note: The fabric shade may become warm during extended use. This is normal.

Bulb Replacement

Always unplug lamp before replacing bulb.

Allow bulb to cool completely if lamp was recently on.
Gently unscrew the old bulb counterclockwise from the E27 socket.
Screw in the new compatible bulb (max 13W LED) clockwise until snug. Do not overtighten.
Plug in lamp and test with the switch.

WARNING! Use only the specified bulb type and wattage to prevent overheating and damage.

Care & Cleaning

Unplug lamp and allow to cool before cleaning.

Fabric Shade: Use a soft brush or vacuum cleaner with a brush attachment to remove dust. Do not wash.
Metal Parts (Base/Pole): Wipe with a soft, slightly damp cloth. Dry immediately.
Plastic Parts: Wipe with a dry cloth.

CAUTION! Do not immerse any part of the lamp in water. Do not use abrasive cleaners or solvents.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at the time of purchase or on www.ikea.com. The warranty covers material and manufacturing defects under normal household use for the specified period. Keep your receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; not plugged in; switch off	Replace bulb; ensure plug is firmly in outlet; check switch position.
Lamp wobbles or is unstable	Base not level; screws loose; floor uneven	Tighten all pole and base screws; place on a level surface.
Light flickers	Loose bulb; faulty bulb; poor socket contact	Ensure bulb is screwed in tightly; try a different bulb.
Overheating or unusual smell	Bulb wattage too high; poor ventilation	Use only a max 13W LED bulb; ensure shade is not covered.
Pole height cannot be adjusted	Locking mechanism too tight	Loosen the locking screw slightly, adjust height, then retighten.

Disposal: Dispose of according to local regulations for electronic waste. Remove bulb before disposal.

Customer Service: For missing parts or further assistance, contact IKEA customer support at 1-800-434-4532 or visit www.ikea.com.