IKEA ANKARSPEL 104.943.60 Wall Lamp instructions manual

The IKEA ANKARSPEL 104.943.60 is a modern wall lamp designed for ambient lighting. It features a clean, minimalist design, an integrated LED light source, and a durable metal construction. Suitable for indoor use in living rooms, bedrooms, or hallways. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Package Contents 4. Tools Required 5. Installation Instructions 6. Operation 7. Care & Maintenance 8. Technical Specifications 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Metal shade, integrated non-replaceable LED module, wall mounting bracket, and necessary hardware.

Feature	Description
Design	Minimalist, modern wall lamp with a metal shade
Light Source	Integrated, non-replaceable LED
Mounting	Wall-mounted, fixed position
Power Supply	Connects to standard household electrical wiring
Finish	Powder-coated metal for durability
Intended Use	Indoor ambient lighting

Safety Information

Read all instructions before installation and use.

ELECTRICAL SAFETY: Installation must be performed by a qualified electrician in accordance with local building and electrical codes.
Ensure the power is switched OFF at the circuit breaker before beginning installation.
This luminaire is for indoor use only. Do not install in damp or wet locations.
The integrated LED light source is not replaceable. Do not attempt to disassemble the lamp.
Keep packaging materials away from children to prevent suffocation.

WARNING! Risk of electric shock. Incorrect installation can cause serious injury or fire.

Package Contents

Before starting, verify all parts are present.

1 x ANKARSPEL Wall Lamp (with integrated LED)
1 x Wall mounting bracket
2 x Screws with wall plugs
1 x Instruction manual (this sheet)

CAUTION! Do not discard any parts until installation is complete.

Tools Required

Phillips screwdriver
Drill with appropriate drill bit (for masonry walls, if needed)
Pencil
Spirit level
Wire strippers/cutters (for electrical connection)
Screwdriver for terminal screws

Installation Instructions

Follow these steps carefully for safe and proper installation.

Prepare the Location: Choose a suitable location on the wall near a power source. Ensure the wall structure can support the lamp's weight.
Mark & Drill: Hold the mounting bracket against the wall. Use a pencil to mark the screw holes. Use a spirit level to ensure it is straight. Drill holes at the marked points and insert the supplied wall plugs.
Mount the Bracket: Secure the mounting bracket to the wall using the supplied screws.
Electrical Connection (by qualified electrician):
- Turn OFF power at the circuit breaker.
- Connect the lamp's wires (Live/Brown, Neutral/Blue, Earth/Green&Yellow) to the corresponding house wiring in the wall box.
- Secure connections with wire nuts or terminal blocks as per local code.
Attach the Lamp: Align the lamp with the mounted bracket. Secure it in place according to the lamp's design (this may involve tightening a screw or clipping it on). Ensure it is firmly attached.
Final Check: Ensure no wires are pinched. Restore power at the circuit breaker and test the lamp using the wall switch.

Tip: If unsure about any step, consult a professional electrician.

Operation

The lamp is operated via the connected wall switch.

Turn the lamp ON/OFF using the wall switch controlling the circuit.
The integrated LED provides instant, flicker-free light at full brightness.
This lamp does not have a dimmer function unless connected to an external, compatible LED dimmer switch (consult an electrician).

Note: The LED light source has a long lifespan and does not require replacement.

Care & Maintenance

To clean, first turn OFF the power at the wall switch.

Allow the lamp to cool completely.
Wipe the exterior with a soft, dry or slightly damp cloth.
Do not use abrasive cleaners, solvents, or chemicals.
Do not immerse the lamp in water or other liquids.

CAUTION! Never clean the lamp while it is connected to power or is hot.

Technical Specifications

Article Number: 104.943.60
Power Consumption: [e.g., 8W] (Check lamp label for exact value)
Light Output: [e.g., 600 lumens]
Color Temperature: [e.g., 2700K Warm White]
Input Voltage: 120V AC, 60Hz (for North America)
Dimensions: Approx. Height X Width X Depth (consult IKEA website for exact dimensions)
Material: Metal, Powder coating
Weight: Approx. [e.g., 1.2 kg]
Estimated Lifespan: Up to 25,000 hours

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power failure / Switch off	Check circuit breaker/fuse. Ensure wall switch is ON.
Lamp does not turn on	Faulty wiring connection	Turn OFF power. Have a qualified electrician check all connections.
Lamp flickers	Incompatible dimmer switch	This lamp may not be dimmable. Remove dimmer switch or consult an electrician for a compatible LED dimmer.
Lamp is hot to touch	Normal operation / Ventilation	LEDs generate some heat. Ensure the lamp has adequate air circulation and is not covered.
Light output is low	End of life / Electrical issue	The integrated LED may be near its end of life. Contact IKEA support.

Reset: Not applicable. For electrical issues, consult an electrician.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included in the packaging or available at IKEA stores for full terms and conditions.

For Support:
Visit: www.ikea.com
Contact your local IKEA store.
Have the article number (104.943.60) ready when seeking assistance.

Disposal: At end of life, dispose of this product according to local regulations for electronic waste. Do not dispose of with household trash.