IKEA ALFTA 503.828.41 Adhesive Hook instructions manual

The IKEA ALFTA 503.828.41 is a versatile adhesive hook designed for easy, tool-free installation on smooth, clean surfaces. It provides a reliable hanging solution for lightweight items such as keys, towels, small kitchen utensils, or decorative objects. Below are key sections covering safety, features, installation, usage, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Installation Instructions 4. Specifications 5. Usage Guidelines 6. Weight Capacity & Surfaces 7. Removal & Repositioning 8. Care & Cleaning 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Adhesive Hook, Protective backing paper.

Feature	Description
Adhesive Backing	Strong, pressure-sensitive adhesive for instant bonding
Hook Design	Curved, durable plastic hook for secure hanging
Surface Type	For smooth, non-porous surfaces only
Installation	Tool-free, peel-and-stick application
Finish	White plastic, matte finish
Weight Capacity	Designed for lightweight items (see Specifications)

Package Contents

Unpack and inspect contents.

IKEA ALFTA Adhesive Hook (1 piece).
Instruction manual (this sheet).

NOTE: Ensure all parts are present before proceeding. Do not use if packaging is damaged.

Installation Instructions

Follow these steps for proper installation.

Surface Preparation: Clean the surface thoroughly with isopropyl alcohol or soapy water. Rinse and dry completely. Surface must be smooth, dry, and free of dust, grease, or wax.
Peel Backing: Remove the protective backing paper from the adhesive side of the hook.
Positioning: Align the hook on the desired spot. Ensure it is level.
Application: Press firmly onto the surface for 30 seconds, applying even pressure across the entire adhesive pad.
Curing Time: Wait at least 1 hour before hanging any items to allow the adhesive to bond fully.

WARNING! Do not install on wallpaper, textured paint, fabric, or uneven surfaces. Adhesion will be poor.

Specifications

Article Number: 503.828.41
Product Name: ALFTA
Type: Adhesive Hook
Material: Polypropylene plastic, Acrylic adhesive
Color: White
Dimensions (approx.): Hook: 7 cm x 5 cm x 3 cm (H x W x D)
Weight Capacity: Maximum 1 kg (2.2 lbs)
Surface Temperature Range: 10°C to 40°C (50°F to 104°F) during application

Usage Guidelines

Use the hook for its intended purpose only.

Recommended Items: Keys, lightweight towels, oven mitts, measuring cups, small tools, decorative garlands.

Do NOT Hang: Heavy coats, wet bath towels, pots and pans, electrical cords, or any item exceeding 1 kg. Do not use as a grab handle or support for body weight.

Weight Capacity & Surfaces

Compatible Surfaces:

Glass (e.g., mirrors, shower doors)
Glazed ceramic tiles
Laminated surfaces
Painted drywall (smooth finish)
Metal (smooth, clean)
Plastic (smooth, non-greasy)

Incompatible Surfaces: Textured walls, brick, concrete, wood, wallpaper, vinyl, fabric, silicone, dusty or greasy surfaces.

Tip: Test adhesion in an inconspicuous area first if unsure about surface compatibility.

Removal & Repositioning

To remove the hook without damaging the surface:

Gently pull the bottom of the hook away from the wall at a low angle.
Slowly stretch the adhesive tab downwards until it releases.
Any residual adhesive can be rolled off with fingers. Clean surface with isopropyl alcohol.

Note: The adhesive is designed for single use. Repositioning is not recommended as adhesion strength will be significantly reduced. Use a new hook for a new location.

Care & Cleaning

Wipe the hook with a damp cloth if dirty. Do not use abrasive cleaners or solvents.

CAUTION! Do not submerge in water or expose to steam for prolonged periods (e.g., inside a shower). While water-resistant, constant moisture may weaken adhesion over time.

Safety Information

Keep out of reach of children during installation to avoid choking hazard on small parts (backing paper).
Do not install above beds, sofas, or where a falling item could cause injury.
Do not expose to direct heat sources (ovens, radiators) or open flame.
For indoor use only.

Warranty & Support

This product is covered by IKEA's limited warranty. Refer to IKEA terms and conditions. For product support, contact your local IKEA store or visit www.ikea.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Hook falls off immediately	Surface not clean or compatible	Clean surface properly with alcohol. Ensure surface is smooth and non-porous. Test surface compatibility.
Hook falls off after some time	Weight limit exceeded; surface unsuitable; insufficient curing time	Ensure item weight is under 1 kg. Check surface type. Allow full 1-hour cure time before use.
Adhesive leaves residue	Removed incorrectly	Stretch adhesive tab slowly during removal. Use isopropyl alcohol to clean residue.
Hook will not stick	Protective backing not fully removed; surface cold or damp	Ensure all backing paper is peeled off. Install at room temperature on a dry surface.
Paint peels off with hook	Weak paint adhesion to wall	This indicates poor paint quality. Install on a more stable surface. Test paint adhesion first.

Disposal: Dispose of according to local plastic and adhesive waste regulations.

Support: www.ikea.com