IKEA ALEX 294.221.94 Drawer Unit instructions manual

The IKEA ALEX 294.221.94 is a versatile drawer unit designed for home or office use, featuring multiple drawers for organized storage, a sturdy construction, and a clean, modern design. Below are key sections covering safety, assembly, parts identification, installation, usage, care, and troubleshooting.

1. Parts and Components 2. Tools Required 3. Assembly Instructions 4. Installation and Placement 5. Usage Guidelines 6. Care and Maintenance 7. Safety Information 8. Troubleshooting 9. Warranty and Support

Parts and Components

Key components included in the package: Drawer unit frame, drawers, drawer fronts, drawer runners, screws, cam locks, dowels, and assembly instructions.

Part	Description
Drawer unit frame	Main body structure of the unit
Drawers	Removable storage compartments
Drawer fronts	Front panels attached to drawers
Drawer runners	Mechanism for smooth drawer operation
Screws	For securing components together
Cam locks	For locking panels in place
Dowels	Wooden pins for alignment
Assembly instructions	Step-by-step guide

Tools Required

No specialized tools needed; all necessary tools are included.

Included Allen key: For tightening screws and cam locks.
Optional: Soft mallet for tapping dowels (use carefully).

WARNING! Do not use power tools as they may damage the components.

Assembly Instructions

Follow steps in order; ensure all parts are present before starting.

Lay out all parts on a clean, flat surface.
Assemble the frame: Connect side panels to top and bottom using dowels and cam locks.
Attach back panel: Secure with provided screws.
Install drawer runners: Attach to inner sides of frame.
Assemble drawers: Connect sides, front, and back; attach drawer bottom.
Attach drawer fronts: Align and secure to drawers.
Insert drawers into frame: Ensure runners engage properly.
Tighten all screws and cam locks; check stability.

CAUTION! Assemble on a soft surface to avoid scratches. Two people recommended for larger steps.

Installation and Placement

Dimensions: Refer to packaging for exact measurements.
Weight Capacity: Do not exceed recommended weight per drawer.
Placement: Place on a level, stable floor away from direct sunlight and moisture.
Wall Anchoring: For safety, anchor unit to wall using appropriate hardware (not included).

Usage Guidelines

Designed for general storage of office supplies, documents, or personal items.

Proper Use: Open and close drawers gently using handles. Distribute weight evenly. Avoid overloading.

Drawer Adjustment: If drawers stick or are uneven, adjust runners by loosening screws, realigning, and retightening.

Care and Maintenance

Clean with a damp cloth and mild detergent; dry immediately.

Unload drawers before moving or cleaning.
Avoid abrasive cleaners or solvents.
Check and tighten screws periodically.

Tip: For stubborn stains, use a soft cloth with water and a small amount of dish soap.

Safety Information

Keep away from heat sources and open flames. Do not allow children to climb on unit.

WARNING! To prevent tipping, secure unit to wall, especially if children are present. Do not place heavy objects on top.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer sticks or doesn't close	Misaligned runners or overloading	Realign runners; reduce load; ensure nothing obstructs movement.
Unit wobbles	Uneven floor or loose screws	Place on level surface; check and tighten all screws and cam locks.
Drawer front misaligned	Loose screws on drawer front	Loosen screws, align front, and retighten.
Cam lock not holding	Not fully tightened or stripped	Ensure cam is turned fully; replace if damaged.
Missing parts	Package incomplete	Contact IKEA customer service with product number and receipt.

Note: Do not modify unit; alterations may void warranty and compromise safety.

Warranty and Support

IKEA limited warranty applies; refer to warranty card for details. For assistance, visit www.ikea.com or contact your local IKEA store.

Support: Provide product number (294.221.94) when contacting support.