IKEA ALEFJÄLL 103.674.61 Chair instructions manual

The IKEA ALEFJÄLL 103.674.61 is an office chair with adjustable height, tilt tension, and a swivel function. It features a breathable mesh backrest, padded seat, armrests, and casters for mobility. Designed for comfort during extended sitting, it supports ergonomic posture and includes assembly instructions for safe setup. Below are key sections for safety, features, assembly, adjustment, care, and troubleshooting.

Features at a Glance

Key components: Mesh backrest, Padded seat, Adjustable armrests, Gas lift for height adjustment, Tilt tension control, Swivel base with casters.

Assembly Instructions

Unpack all parts and check contents against the parts list. Work on a clean, flat surface.

1. Attach the casters: Insert five casters into the holes on the star-shaped base until they click into place.
2. Insert the gas lift: Place the gas lift cylinder into the center hole of the base.
3. Attach the seat: Align the seat mechanism with the gas lift and press down firmly until secure.
4. Install the backrest: Connect the backrest to the seat using the provided screws and Allen key.
5. Attach the armrests: Secure the armrests to the sides of the seat with screws.
6. Final check: Ensure all screws are tightened and parts are stable.

WARNING! Chair is heavy; lift with care to avoid injury. Ensure all connections are secure before use.

Adjustment Guide

After assembly, adjust the chair for optimal comfort and ergonomics.

1. Height adjustment: Sit on the chair and pull the lever under the seat to raise or lower to desired height.
2. Tilt tension: Turn the knob under the seat clockwise to increase resistance, counterclockwise to decrease.
3. Armrest adjustment: Press the buttons on the armrests to adjust height and angle.
4. Swivel function: The chair rotates freely; ensure casters move smoothly.

CAUTION! Do not adjust while standing on the chair. Keep fingers clear of moving parts.

Specifications

• Model: ALEFJÄLL 103.674.61
• Dimensions (assembled): Height: 100-120 cm, Width: 68 cm, Depth: 68 cm
• Seat Height Range: 48-58 cm
• Materials: Polyester mesh, Polyurethane foam, Steel, Plastic
• Weight Capacity: 110 kg (242 lbs)
• Casters: Suitable for hard floors (carpet casters available separately)
• Warranty: 10-year limited warranty (see terms)
• Color Options: Black, Gray, Blue (varies by region)

Parts and Tools

Included in the package:

Tip: Keep all parts and tools until assembly is complete.

Safety Information

Read all instructions before assembly and use.

1. Use only on stable, level surfaces; avoid uneven floors.
2. Do not exceed the maximum weight capacity of 110 kg.
3. Keep away from heat sources and direct sunlight to prevent material damage.
4. Ensure casters are clean and free of debris for smooth movement.
5. Do not stand on the chair or use as a step ladder.
6. Inspect regularly for loose screws or damage; tighten as needed.

WARNING! Children should not play with the chair; risk of tipping or entrapment.

Care & Maintenance

Clean regularly to maintain appearance and function.

1. Mesh backrest: Vacuum or wipe with a damp cloth; air dry.
2. Padded seat: Clean with mild soap and water; avoid harsh chemicals.
3. Frame and base: Wipe with a dry cloth; use mild detergent for stains.
4. Casters: Remove hair and dust buildup; check for smooth rotation.
5. Mechanism: Lubricate moving parts annually with silicone spray if needed.

CAUTION! Do not immerse in water or use abrasive cleaners.

Warranty Information

IKEA provides a 10-year limited warranty for the ALEFJÄLL chair, covering defects in materials and workmanship under normal use. Warranty does not cover damage from misuse, improper assembly, or wear and tear. For claims, contact IKEA customer service with proof of purchase. For support, visit www.ikea.com or call your local IKEA store.

Troubleshooting

Reset: Disassemble and reassemble if persistent issues occur.

Service: Contact IKEA customer service or visit www.ikea.com for assistance.