IKEA ACKJA 205.589.07 Table Lamp instructions manual

The IKEA ACKJA 205.589.07 is a modern table lamp designed for ambient lighting. It features a clean, minimalist design, an E14 socket for energy-efficient bulbs (max 7W LED or equivalent), an integrated on/off switch on the cord, and a stable base. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Bulb Replacement 7. Placement & Usage 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Lamp base, shade, E14 bulb socket, power cord with integrated switch.

Feature	Description
Lamp Base	Stable, weighted base to prevent tipping
Shade	Fabric or synthetic material diffuser for soft light
Bulb Socket	E14 (small Edison screw) type
Power Cord	With integrated on/off switch
Max Wattage	7W LED or equivalent energy-saving bulb
Design	Minimalist, modern aesthetic
Materials	Metal base, fabric/plastic shade

Assembly Instructions

Unpack all parts and check contents against the parts list.

Attach the base: If separate, screw the base stem into the main weighted base.
Install the bulb socket: The socket is pre-installed in the lamp body. Ensure it is secure.
Attach the shade: Align the shade with the holder on the lamp body and secure it by pressing or screwing (depending on model).
Install the bulb: Screw an appropriate E14 bulb (max 7W LED) into the socket. Do not overtighten.
Route the cord: Place the cord neatly from the base to your power outlet.

WARNING! Ensure the lamp is unplugged during assembly. Do not force parts together.

First-Time Setup

After assembly, place the lamp on a stable, flat, and heat-resistant surface.

Plug the power cord into a standard 120V AC wall outlet.
Turn on the lamp using the switch on the cord.
Adjust the lamp's position to direct light as needed.

CAUTION! Keep the lamp away from flammable materials, water, and high-traffic areas where it could be knocked over.

Specifications

Model: ACKJA 205.589.07
Socket Type: E14 (Small Edison Screw)
Max Bulb Wattage: 7W LED or equivalent (e.g., 40W incandescent equivalent)
Power Supply: 120V AC, 60Hz
Cord Length: Approximately 6 feet (1.8 meters)
Switch: Integrated on/off switch on cord
Dimensions (approx.): Height: 12", Base Diameter: 6"
Weight: 2.2 lbs (1 kg)

Controls and Operation

The lamp is operated solely via the on/off switch located on the power cord.

Operation: Press the switch to turn the lamp ON. Press again to turn it OFF.

Tip: For ambient lighting, use a warm white LED bulb (2700K). For task lighting, a brighter cool white bulb may be preferable.

Bulb Replacement

Always turn off and unplug the lamp before replacing the bulb.

Allow the bulb to cool completely if it was recently on.
Gently unscrew the old bulb counterclockwise from the E14 socket.
Screw a new E14 bulb (max 7W LED or equivalent) clockwise into the socket until snug. Do not overtighten.
Plug in the lamp and turn it on to test the new bulb.

WARNING! Never exceed the maximum recommended wattage. Using a higher-wattage bulb can cause overheating and fire.

Placement & Usage

Designed for use on stable surfaces like bedside tables, desks, or shelves.

Ensure the surface is level and stable.
Keep the lamp at least 3 feet away from sinks, bathtubs, or other water sources.
Do not drape fabrics or papers over the lampshade.
Ensure the power cord is not pinched or damaged by furniture.

Tip: Use the lamp to create a cozy atmosphere in living rooms or bedrooms.

Safety Information

This appliance is intended for household use only.

Always unplug the lamp before cleaning, maintenance, or when not in use for extended periods.
Do not use the lamp outdoors or in damp locations.
Do not touch the lamp or bulb when it is on, as surfaces may become hot.
Keep out of reach of children and pets.
Do not modify the plug or cord.
If the cord is damaged, it must be replaced by the manufacturer or a qualified service agent.

Care & Cleaning

Unplug the lamp and allow it to cool completely before cleaning.

Shade: Wipe gently with a dry, soft cloth or use a vacuum cleaner with a soft brush attachment. Do not use liquids or abrasive cleaners.
Base and Body: Wipe with a slightly damp cloth, then dry immediately. Do not immerse in water.
Cord: Wipe with a dry cloth.

CAUTION! Never use harsh chemicals, solvents, or abrasive materials on any part of the lamp.

Warranty & Support

IKEA products are covered by a limited warranty. Refer to the IKEA warranty terms included with your purchase or available at IKEA stores and www.IKEA.com.

For assembly help, spare parts, or other support:

Visit: www.IKEA.com
Contact your local IKEA store.
Refer to the product number (205.589.07) when seeking assistance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty bulb / Loose connection	Check if outlet works; replace bulb; ensure plug is fully inserted and bulb is screwed in tightly.
Lamp flickers	Loose bulb / Faulty bulb / Poor connection	Turn off, unplug, and reseat the bulb. Try a new bulb.
Lamp gets very hot	Bulb wattage too high / Poor ventilation	Immediately turn off and unplug. Ensure you are using a bulb with 7W LED or less. Ensure vents (if any) are not blocked.
Shade is loose or wobbly	Not properly secured during assembly	Turn off and unplug. Check the shade attachment mechanism and re-secure it according to assembly instructions.
Switch feels stuck	Internal mechanism fault	Do not force. Unplug the lamp and contact IKEA support for a replacement switch or cord.

Disposal: Dispose of the lamp and bulbs according to local electronic waste (e-waste) and hazardous material regulations. Do not dispose of with household trash.