IKEA ÖMSINNAD 404.621.45 Range Hood instructions manual

The IKEA ÖMSINNAD 404.621.45 is a wall-mounted range hood designed for efficient kitchen ventilation. It features multiple fan speeds, integrated lighting, aluminum grease filters, and a recirculation or external venting option. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Wall-mounted hood body, Control Panel, Aluminum Grease Filters, Lighting (2 x G4 halogen or LED bulbs), Motor Unit, and Ducting Adapter.

Safety Information

Read all instructions before installation and use.

1. Installation must be performed by a qualified electrician in accordance with local regulations.
2. Disconnect power at the circuit breaker before installation or maintenance.
3. The hood must be placed at the minimum height specified above the cooking surface.
4. Do not flambé under the range hood.
5. Grease filters must be cleaned regularly to prevent fire hazard.

WARNING! Risk of electric shock. Ensure the appliance is properly grounded. Do not operate without grease filters installed.

Installation

Unpack and check all parts are present. Decide on ducted or recirculation mode.

1. Mounting: Use the template to mark drill holes on the wall. Ensure wall can support the hood's weight.
2. Electrical Connection: Connect to a dedicated circuit with proper grounding.
3. Ducting (Ducted Mode): Connect the duct adapter to an external vent. Use the shortest, straightest duct path possible.
4. Recirculation Mode: Install the included carbon filter behind the grease filters. No external ducting required.
5. Final Assembly: Hang the hood on the wall bracket, secure it, and attach the grease filters.

CAUTION! The hood is heavy; use two people for handling. Ensure all screws are tightened securely.

Specifications

• Model: ÖMSINNAD 404.621.45
• Type: Wall-mounted range hood
• Width: 60 cm
• Motor Power: 180 W
• Max Airflow: 650 m³/h (ducted mode)
• Noise Level: 65 dB(A) max at highest speed
• Lighting: 2 x max 20W G4 halogen bulbs (or equivalent LED)
• Voltage: 220-240V~, 50Hz
• Recommended Height above Cooktop: 65-75 cm

Controls and Operation

Control Panel: POWER button, 3 SPEED buttons (1, 2, 3), INTENSIVE button, LIGHT button.

Operation:

1. Press POWER to turn the hood on/off.
2. Press SPEED 1, 2, or 3 to select fan speed. Speed 1 is low, 3 is high.
3. Press INTENSIVE for maximum extraction for 10 minutes, after which it returns to speed 3.
4. Press LIGHT to turn the cooktop lamps on/off.

Timer Function: The hood can be set to run for 15 minutes after cooking (consult specific control manual).

Venting Options

Ducted Mode (Recommended): Vents air outside through a duct. Provides best performance.

1. Connect the hood's outlet to a wall or roof vent using a 150mm diameter duct.
2. Ensure the duct path is as short and straight as possible with minimal bends.
3. Install a non-return flap if not already present in the vent outlet.

Recirculation Mode: Cleans air and returns it to the kitchen.

1. Purchase the optional carbon filter kit (not always included).
2. Install the carbon filter(s) behind the aluminum grease filters.
3. No external ducting is needed. Ensure the recirculation vents on the hood are not blocked.

Maintenance & Cleaning

Unplug the hood or turn off the circuit breaker before cleaning.

1. Surface: Clean the exterior with a soft cloth dampened with mild detergent. Do not use abrasive cleaners.
2. Grease Filters: Remove filters by pulling the latch. Wash in hot soapy water or dishwasher (top rack). Let dry completely before reinstalling. Clean every month under normal use.
3. Carbon Filters (Recirculation only): Replace every 3-6 months depending on use. They cannot be washed.
4. Light Bulbs: Let bulbs cool. Remove the grease filter to access the bulb cover. Replace with same type and wattage (max 20W G4).

CAUTION! Do not use steam cleaners on the hood. Ensure all parts are dry before reconnecting power.

Replacing Parts

Use only original IKEA spare parts.

Regulatory Information

This appliance complies with EU Directives 2014/35/EU (LVD), 2014/30/EU (EMC), and 2009/125/EC (ErP). The symbol of the crossed-out wheeled bin indicates separate collection for electrical and electronic equipment (WEEE). Dispose of according to local regulations. For EU product registration, visit www.ikea.com. IKEA and ÖMSINNAD are trademarks of Inter IKEA Systems B.V.

Troubleshooting

Service: For assistance, contact IKEA customer support or visit the IKEA website. Refer to model number ÖMSINNAD 404.621.45.