IKEA ÅRSTID 501.638.67 Floor Lamp instructions manual

The IKEA ÅRSTID 501.638.67 is a modern floor lamp featuring a sleek metal frame, adjustable height, energy-efficient LED light source, touch dimmer control, and a stable weighted base. It provides ambient lighting for living rooms, bedrooms, or offices. Below are key sections for safety, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Assembly Instructions 5. Specifications 6. Controls and Operation 7. Light Adjustment 8. Care & Maintenance 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: Adjustable metal stand, weighted base, integrated LED panel, touch-sensitive dimmer control, and cable management.

Feature	Description
Adjustable Height	Extendable pole from 120cm to 150cm
Light Source	Integrated non-replaceable LED, 3000K warm white
Dimmer Control	Touch-sensitive on/off and brightness adjustment
Power Input	AC 100-240V, 50/60Hz
Base	Weighted circular base for stability
Material	Steel frame with powder-coated finish
Cable Length	1.8m power cord with plug
Light Output	800 lumens, dimmable to 10%
Energy Class	A+
IP Rating	IP20 (for indoor use only)

Package Contents

Unpack and verify all parts are included before assembly.

Main pole sections (3 pieces)
Weighted base
LED light head assembly
Power cord with plug
Assembly hardware (screws, bolts)
Allen key (included)
Instruction manual (this document)

WARNING! Check for any transportation damage before assembly. Do not use damaged parts.

Safety Instructions

Read all instructions before assembly and use.

For indoor use only. Keep away from water and moisture.
Place on stable, level surface. Do not place on uneven or slippery surfaces.
Do not exceed maximum wattage equivalent. Use only with integrated LED.
Unplug before cleaning or maintenance.
Keep out of reach of children and pets.
Do not cover lamp or place near heat sources.
Use only with provided power cord.

CAUTION! Risk of electric shock if disassembled incorrectly. Do not attempt to repair integrated LED.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools needed: Allen key (provided).

Attach weighted base to the bottom pole section using provided screws.
Connect middle pole section to bottom section, tighten locking screw.
Connect top pole section to middle section, tighten locking screw.
Attach LED light head to top pole section, secure with provided bolt.
Route power cord through cable management channel in pole.
Plug power cord into socket at base of lamp.
Adjust height by loosening locking collars, set desired height, and retighten.
Plug power cord into wall outlet.

Tip: Ensure all connections are tight and secure before use.

Specifications

Model: ÅRSTID 501.638.67
Dimensions (H): 120-150cm adjustable
Base Diameter: 30cm
Weight: 4.2kg
Light Source: Integrated LED, 10W
Luminous Flux: 800 lm
Color Temperature: 3000K (warm white)
CRI: >80
Dimmable: Yes, touch control (100%-10%)
Power Supply: 100-240V AC, 50/60Hz
Energy Consumption: 10W (max)
Lifetime: 25,000 hours
Material: Steel, powder-coated
Color: Black

Controls and Operation

Touch-sensitive control panel located on light head or pole (model dependent).

Basic Operation:

Plug into wall outlet.
Touch once: Turn ON at last brightness level.
Touch and hold: Adjust brightness (cycle through 100%, 75%, 50%, 25%, 10%).
Touch again: Turn OFF.

Memory Function: Lamp remembers last brightness setting when turned off and on.

Note: Ensure fingers are dry when using touch control.

Light Adjustment

Height and angle adjustment for optimal lighting.

Height: Loosen locking collar, slide pole to desired height, tighten collar.
Light Head Tilt: Loosen bolt at joint, adjust angle (up to 30 degrees), retighten.
Positioning: Place lamp where light is needed without creating glare.

WARNING! Do not force adjustments beyond designed limits.

Care & Maintenance

Unplug lamp before cleaning.

Use dry, soft cloth to clean surfaces.
For stubborn marks, use damp cloth with mild soap. Dry immediately.
Do not use abrasive cleaners, solvents, or chemicals.
Check connections periodically for tightness.
Store in dry place when not in use for extended periods.

CAUTION! Never immerse lamp in water or other liquids.

Warranty Information

IKEA limited warranty: 1 year from date of purchase for manufacturing defects. Warranty covers parts and labor. Proof of purchase required. Warranty does not cover damage from improper use, accidents, modifications, or normal wear and tear. For warranty claims, contact IKEA customer service with receipt and product information.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power	Check wall outlet; ensure plug is fully inserted; try different outlet.
Light flickers	Loose connection	Check all assembly connections; ensure power cord is secure.
Touch control not responding	Dirty surface/wet fingers	Clean touch surface with dry cloth; ensure fingers are dry.
Lamp unstable	Base not properly attached	Re-tighten base screws; ensure surface is level.
Light dim but not brightening	Dimmer at low setting	Touch and hold to cycle to brighter setting.
Unusual noise	Loose parts	Check and tighten all screws and connections.

Service: For non-warranty service or spare parts, contact IKEA customer service or visit www.ikea.com.

Disposal: Dispose according to local electronic waste regulations. Do not dispose with household waste.