IKEA ÅRSTID 104.162.06 Table Lamp instructions manual

The IKEA ÅRSTID 104.162.06 is a modern table lamp designed for ambient lighting. It features a simple, clean design suitable for various room settings. Below are key sections covering safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Bulb Replacement 7. Care & Cleaning 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: Lamp base, lampshade, cord with switch, bulb (not included).

Feature	Description
Design	Modern, minimalist table lamp
Material	Metal base, fabric or paper shade (varies by model)
Power	Standard E26/E27 bulb socket (max wattage specified on label)
Switch	Inline cord switch for easy on/off control
Dimensions	Approx. height: 40 cm, base diameter: 15 cm (varies)

Assembly Instructions

Unpack all parts and check contents against parts list.

Attach the lampshade to the lamp base: Align the shade frame with the base holder and secure by twisting clockwise until snug.
Insert bulb: Use an E26/E27 LED or incandescent bulb (max wattage as labeled). Screw bulb into socket firmly but do not overtighten.
Place lamp on a stable, flat surface away from edges.
Plug the cord into a standard wall outlet.

WARNING! Ensure lamp is unplugged during assembly. Do not exceed the maximum wattage rating.

First-Time Setup

After assembly, test the lamp functionality.

Plug in the lamp to a power outlet.
Turn on using the inline cord switch.
If the bulb does not light, ensure it is properly screwed in and the outlet is functional.
Adjust placement for desired lighting effect.

CAUTION! Keep lamp away from flammable materials and ensure adequate ventilation.

Specifications

Model: ÅRSTID 104.162.06
Bulb Socket: E26/E27 standard
Max Wattage: Check label on lamp (typically 40W LED or equivalent)
Cord Length: Approximately 1.8 meters
Voltage: 120V AC, 60Hz (for North America)
Materials: Base: Metal; Shade: Fabric/Paper; Cord: Plastic-coated
Weight: Approx. 1.2 kg

Controls and Operation

The lamp is operated via the inline switch on the power cord.

Switch: Flip to ON (I) position to turn lamp on; OFF (O) to turn off.

Tip: For ambient lighting, use a warm white LED bulb. For task lighting, choose a brighter bulb within wattage limits.

Bulb Replacement

Replace bulb when it burns out or for different lighting effects.

Turn off lamp and unplug from outlet.
Allow bulb to cool completely if it was recently on.
Unscrew old bulb counterclockwise and dispose of properly.
Screw in new E26/E27 bulb clockwise until snug.
Plug in and test.

WARNING! Always unplug lamp before replacing bulb. Use only bulbs at or below the maximum wattage specified.

Care & Cleaning

Unplug lamp before cleaning.

Base: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners.
Shade: Gently dust with a soft brush or dry cloth. For fabric shades, vacuum with a brush attachment if needed.
Cord: Wipe with dry cloth. Do not immerse in water.

CAUTION! Do not use liquid or spray cleaners directly on the lamp. Never immerse any part of the lamp in water.

Safety Information

This lamp is for indoor use only.
Do not use outdoors or in damp locations (e.g., bathroom) unless rated for such use.
Do not place near heat sources, open flames, or flammable materials.
Do not cover the lampshade while in operation to prevent overheating.
Keep cord away from heated surfaces and do not run under carpets or furniture.
Do not attempt to disassemble or modify the lamp.

Warranty & Support

IKEA limited warranty applies. Refer to IKEA warranty terms for details. For product support, contact IKEA customer service or visit www.ikea.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; not plugged in; switch off; faulty outlet	Replace bulb; ensure plug is secure; flip switch to ON; test outlet with another device.
Lamp flickers	Loose bulb; faulty bulb; poor connection	Turn off, unplug, and tighten bulb; try a different bulb.
Lamp gets hot	High wattage bulb; covered shade; poor ventilation	Use lower wattage bulb; ensure shade is not covered; move to a well-ventilated area.
Shade is loose	Not properly attached during assembly	Turn off and unplug. Twist shade clockwise onto base until secure.
Unusual smell	New bulb (normal initially); dust on bulb; electrical issue	Allow new bulb to burn for a few hours. If smell persists or is strong, unplug and contact support.

Service: For issues not resolved above, contact IKEA customer support or visit an IKEA store.