IKEA ÅRSTID 004.161.55 Wall Lamp instructions manual

The IKEA ÅRSTID 004.161.55 is a modern wall lamp designed for ambient lighting, featuring a clean Scandinavian design, adjustable light direction, and easy installation. It operates with a standard E27 bulb (max 40W) and includes a wall bracket, mounting hardware, and a shade. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Installation Steps 5. Operation & Adjustments 6. Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Wall bracket, lamp shade, mounting screws and plugs, cable management.

Feature	Description
Design	Minimalist Scandinavian style, white finish
Light Source	E27 socket, max 40W (LED recommended)
Adjustability	Shade can be tilted for directed light
Mounting	Wall-mounted, includes template for drilling
Dimensions	Height: 25 cm, Width: 15 cm, Depth: 12 cm
Weight	0.8 kg (without bulb)
Cable Length	1.5 m power cord with plug
Material	Steel shade, plastic base
IP Rating	IP20 - for indoor use only
Voltage	220-240V, 50/60Hz

Package Contents

Unpack and verify all parts before installation.

Wall lamp shade (1 piece)
Wall mounting bracket (1 piece)
Screws and wall plugs (4 sets)
Instruction manual (this document)
Warning: Bulb not included.

WARNING! Check for damage before installation. Do not use damaged parts.

Safety Instructions

Read all instructions before installation and use.

Disconnect power: Always turn off electricity at the circuit breaker before installation.
Suitable location: Install on a solid wall, away from heat sources and moisture.
Correct bulb: Use only E27 max 40W bulbs. LED bulbs recommended for energy efficiency.
No modifications: Do not alter the lamp or its electrical components.
Children: Keep out of reach of young children during installation and operation.

CAUTION! Risk of electric shock if installed incorrectly. If unsure, consult a qualified electrician.

Installation Steps

Follow these steps for safe and correct installation.

Prepare wall: Choose location near a power outlet. Use included template to mark drilling points.
Drill holes: Drill holes (6 mm) at marked points and insert wall plugs.
Mount bracket: Align bracket with holes and secure with screws (do not fully tighten yet).
Connect wires: With power OFF, connect lamp wires to household wiring (Live to Live, Neutral to Neutral, Earth to Earth). Use wire connectors provided.
Attach shade: Place shade onto bracket and tighten the securing screw. Adjust tilt as desired.
Insert bulb: Screw in an E27 bulb (max 40W). Do not overtighten.
Final check: Ensure all screws are tight, wires are secure, and no bare wires are exposed.
Test: Restore power and switch on the lamp to test functionality.

Tip: Use a spirit level to ensure the bracket is horizontal before drilling.

Operation & Adjustments

Once installed, operation is simple.

Turning On/Off: Use the wall switch connected to the power circuit.
Light Direction: Loosen the shade adjustment knob, tilt the shade to desired angle, and retighten the knob.
Bulb Replacement: Ensure lamp is OFF and cool. Unscrew old bulb, replace with new E27 bulb (max 40W).

Note: The lamp does not have a built-in switch or dimmer. For dimming, use a dimmable LED bulb with an external dimmer switch installed by an electrician.

Specifications

Product Name: ÅRSTID
Article Number: 004.161.55
Socket: E27
Max Power: 40 Watt
Voltage: 220-240V ~ 50/60Hz
Dimensions (HxWxD): 25 x 15 x 12 cm
Cable Length: 1.5 m
Material: Shade: Steel/Plastic, Base: Plastic
Color: White
IP Rating: IP20 (Indoor use)
Certifications: CE marked, complies with EU safety standards.

Care & Maintenance

Unplug or turn off power at the circuit breaker before cleaning.

Cleaning: Use a dry, soft cloth to wipe the shade and base. For stubborn marks, use a slightly damp cloth. Dry immediately.
Avoid: Do not use abrasive cleaners, solvents, or chemicals.
Inspection: Periodically check that all screws are tight and the lamp is securely attached to the wall.

CAUTION! Never immerse the lamp in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not light	Power off / Bulb faulty	Check circuit breaker/wall switch. Replace bulb.
Lamp flickers	Loose bulb / Poor connection	Turn off power. Tighten bulb. Check wire connections in bracket.
Lamp gets hot	Bulb wattage too high	Use a bulb with max 40W. Switch to LED for less heat.
Lamp is loose on wall	Screws not tight / Wrong wall plugs	Tighten mounting screws. Ensure plugs are suitable for your wall type (solid vs. hollow).
No power at socket	Tripped fuse / Wiring fault	Check home fuse box. If problem persists, consult an electrician.

Note: This product contains no user-serviceable parts inside. Do not attempt to open the electrical housing.

Warranty & Support

This IKEA product is guaranteed under the terms of IKEA's commercial warranty. Refer to your IKEA guarantee document for details.

Recycling: Dispose of the lamp and bulb according to local electronic waste regulations. Do not dispose of with household waste.

For Support: Visit www.ikea.com or contact your local IKEA store.