IKEA ÄPPLARÖ 702.049.23 Bench instructions manual

The IKEA ÄPPLARÖ 702.049.23 is a versatile outdoor bench designed for durability and comfort. Constructed from weather-resistant acacia wood and powder-coated steel, it features a slatted seat, sturdy frame, and is part of the ÄPPLARÖ modular outdoor furniture series. Below are key sections for safety, parts list, assembly, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Specifications 5. Placement & Use 6. Care & Maintenance 7. Seasonal Storage 8. Troubleshooting 9. Warranty & Support

Parts & Hardware

Key components: Acacia wood slats, Powder-coated steel frame, Mounting brackets, Screws, Allen key.

Part Name	Description	Quantity
Bench Seat Slats	Acacia wood, pre-drilled	5
Side Frame (Left)	Powder-coated steel	1
Side Frame (Right)	Powder-coated steel	1
Front/Back Rails	Steel connecting bars	2
Mounting Brackets	For securing slats to frame	10
Screws (5x40mm)	Stainless steel	20
Allen Key	4mm, for assembly	1
Protective Caps	For screw holes	20

Safety Instructions

Read all instructions before assembly. Use proper tools and work on a clean, flat surface.

Inspect Parts: Check for damage or missing parts before starting.
Lifting: Bench is heavy; use two people to lift and move.
Assembly Surface: Use a soft surface (e.g., carpet) to avoid scratching parts.
Tool Safety: Use the provided Allen key; avoid over-tightening screws.
Child Safety: Do not allow children to climb or play on the bench.

WARNING! Ensure all screws are fully tightened before use. Do not exceed maximum load capacity.

Assembly Steps

Estimated assembly time: 30-45 minutes. Tools needed: Allen key (provided).

Prepare Frame: Lay side frames (left and right) parallel on a soft surface.
Attach Rails: Connect front and back rails to side frames using screws (8 total). Hand-tighten first.
Secure Frame: Fully tighten all frame screws with Allen key until snug.
Attach Seat Slats: Place first slat at one end, align with pre-drilled holes. Secure with mounting brackets and screws (2 per bracket).
Repeat: Attach remaining slats, ensuring equal spacing (approx. 10mm gap).
Final Check: Tighten all screws again. Insert protective caps into screw holes.
Inspect: Ensure bench is stable and does not wobble.

Tip: Do not fully tighten slat screws until all slats are positioned for even alignment.

Specifications

Model: ÄPPLARÖ 702.049.23
Dimensions (LxWxH): 118cm x 60cm x 44cm (46.5" x 23.6" x 17.3")
Seat Height: 44cm (17.3")
Material: Frame: Powder-coated steel; Slats: Solid acacia wood
Weight Capacity: Max. 200 kg (440 lbs) distributed evenly
Finish: Wood: Stained brown; Frame: Dark grey
Weather Resistance: Designed for outdoor use; acacia wood is naturally weather-resistant
Warranty: 10-year limited warranty (see terms)

Placement & Use

Designed for outdoor use on patios, decks, gardens, or balconies.

Surface: Place on a flat, stable, and level surface.
Indoor Use: Can be used indoors if desired.
Weight Distribution: Distribute weight evenly across the seat.
Moving: Lift bench; do not drag to avoid damaging legs or surface.
Combining: Can be combined with other ÄPPLARÖ series furniture (tables, chairs).

CAUTION! Do not place on uneven or soft ground. Avoid prolonged direct exposure to sprinklers.

Care & Maintenance

Regular care extends the life of your bench.

Cleaning Wood: Use mild soapy water and a soft brush. Rinse with clean water. Allow to dry completely.
Cleaning Frame: Wipe with damp cloth; dry immediately.
Stain Maintenance: Reapply IKEA outdoor wood stain (sold separately) annually or as needed to maintain color and protection.
Inspection: Check screws periodically and tighten if loose.

DO NOT: Use pressure washers, abrasive cleaners, bleach, or solvents. Do not let water pool on wood surfaces.

Seasonal Storage

For best longevity in harsh climates (snow, heavy rain).

Clean: Thoroughly clean and dry bench before storage.
Disassemble (Optional): For compact storage, you can remove seat slats by unscrewing mounting brackets.
Storage Location: Store in a dry, covered area (garage, shed). If left outdoors, use a waterproof cover designed for furniture.
Elevate: If stored on ground, place on blocks to avoid moisture absorption.

Note: Acacia wood is durable but benefits from protection during extreme winter conditions.

Troubleshooting

Issue	Possible Cause	Solution
Bench wobbles	Uneven surface or loose screws	Place on level ground; check and tighten all frame and slat screws.
Wood cracking/splitting	Weather exposure or dry conditions	Sand lightly and apply outdoor wood oil or stain. Ensure proper seasonal care.
Rust on frame	Scratched coating or prolonged moisture	Sand affected area lightly, clean, and touch up with matching outdoor paint.
Difficult assembly	Misaligned holes	Ensure all parts are oriented correctly as per diagrams. Do not force screws.
Missing part	Packaging error	Contact IKEA customer service with product number (702.049.23) for replacement.

Warranty & Support

IKEA ÄPPLARÖ furniture comes with a 10-year limited warranty. This warranty covers defects in materials and workmanship under normal household use outdoors. It does not cover damage from accidents, negligence, improper assembly, lack of maintenance, or commercial use.

For Support:

Visit the IKEA website: www.ikea.com
Contact IKEA Customer Service: 1-888-888-4532
Have your product number (702.049.23) and receipt ready.
For assembly help, visit the product page online for downloadable instructions and videos.

Recycling: At end of life, disassemble and recycle materials according to local regulations. Wood and metal are widely recyclable.