IKEA ÄPPLARÖ 194.138.83 Armchair instructions manual

The IKEA ÄPPLARÖ 194.138.83 is a durable outdoor armchair designed for the ÄPPLARÖ series, constructed from weather-resistant acacia wood and featuring a slatted design for comfort and drainage. It requires user assembly and is intended for patio, garden, or balcony use. Below are key sections for safety, parts list, assembly instructions, care, maintenance, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Weather Protection 7. Storage & Winterizing 8. Troubleshooting 9. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Armchair frame pieces, slats, screws, washers, Allen key.

Part Description	Quantity	Image Ref.
Armchair Back Frame (Left)	1	A
Armchair Back Frame (Right)	1	B
Seat Frame (Front)	1	C
Seat Frame (Rear)	1	D
Armrests	2	E
Wooden Slats (Long)	8	F
Wooden Slats (Short)	4	G
Assembly Screws (M6 x 45mm)	16	H
Washers	16	I
Allen Key	1	J

Safety Information

Read all instructions before assembly. Use on stable, level surfaces only.

Weight Limit: Maximum load 110 kg (242 lbs).
Assembly: Requires two people. Tighten all screws securely.
Placement: For outdoor use only. Ensure proper ventilation; do not place directly against walls.
Children: Do not allow climbing or standing on the armchair.

WARNING! Failure to follow instructions may result in injury or product damage. Check stability periodically.

Assembly Instructions

Estimated assembly time: 30-45 minutes. Tools needed: Provided Allen key, Phillips screwdriver (optional).

Step 1: Lay out all parts on a soft surface to prevent scratches.
Step 2: Attach the left and right back frames (A, B) to the rear seat frame (D) using screws and washers (H, I). Do not fully tighten yet.
Step 3: Connect the front seat frame (C) to the back frames. Ensure all frame corners are square.
Step 4: Secure the armrests (E) to the assembled frame. Tighten all frame connections firmly.
Step 5: Attach the long wooden slats (F) to the seat frame, starting from the rear. Use provided screws.
Step 6: Attach the short wooden slats (G) to the back frame.
Step 7: Double-check all screws are tight. Wipe clean with a dry cloth.

Tip: Do not overtighten screws into wood to avoid splitting. Assemble on carpet or grass to protect finish.

Specifications

Series: ÄPPLARÖ
Article Number: 194.138.83
Material: Solid acacia wood, pre-treated with a protective stain.
Dimensions (Assembled): Width: 68 cm, Depth: 78 cm, Height: 88 cm, Seat Height: 43 cm.
Weight: 12.5 kg
Weight Capacity: 110 kg (242 lbs)
Color: Brown stained
Intended Use: Outdoor residential use (patio, garden, balcony).
Packaging: Flat-pack. Recyclable cardboard.

Care & Maintenance

Regular care extends the life of your acacia wood furniture.

Cleaning: Use a soft brush or cloth with mild soapy water. Rinse with clean water and let dry completely.
Stain Maintenance: To maintain color and protection, reapply IKEA outdoor wood stain (sold separately) annually or as needed.
Inspection: Check screw tightness at the start of each season. Tighten if loose.
Mildew: If mildew appears, clean with a solution of 60% water and 40% white vinegar. Rinse thoroughly.

CAUTION! Do not use pressure washers, abrasive cleaners, or solvents. Do not use indoor furniture polish.

Weather Protection

Acacia wood is naturally weather-resistant but benefits from protection.

Prolonged exposure to direct sun and rain will cause the wood to naturally gray over time.
Using a protective cover during harsh weather or long periods of non-use is recommended.
Ensure water can drain freely; do not let water pool on the seat.

Storage & Winterizing

For best longevity in harsh winter climates:

Clean and dry the armchair completely.
Apply a fresh coat of protective stain if needed.
Store in a dry, covered area like a garage or shed.
If left outside, use a waterproof, breathable furniture cover. Ensure cover does not trap moisture.

Troubleshooting

Issue	Possible Cause	Solution
Wood cracking or splitting	Natural wood movement; overtightened screws	Sand small cracks smooth. Re-stain. Do not overtighten screws during reassembly.
Wobbly or unstable frame	Loose screws; uneven ground	Tighten all frame screws. Place on a level surface.
Discoloration or graying	Sun and weather exposure	This is natural. Clean and apply outdoor wood stain to restore color.
Mold or mildew spots	Lack of air circulation; damp conditions	Clean with vinegar solution. Let dry fully. Store in a drier location or improve airflow.
Missing hardware	Packaging error	Contact IKEA customer support for a replacement hardware pack.

Warranty & Support

This IKEA product is covered by the IKEA commercial warranty. Refer to the IKEA warranty booklet included with your purchase or available at IKEA stores for specific terms and duration.

Recycling: At end of life, disassemble and dispose of materials according to local recycling regulations. Wood, metal, and cardboard are recyclable.

Support: For missing parts, assembly help, or warranty claims:
Visit: www.ikea.com
Contact your local IKEA store.
Refer to article number: 194.138.83