IKEA ÄNGESBYN 004.978.06 Storage Table instructions manual

The IKEA ÄNGESBYN 004.978.06 is a versatile storage table designed for living rooms, bedrooms, or entryways. It features a sturdy particleboard and fiberboard construction with a white finish, two spacious drawers with metal runners for smooth operation, and a lower open shelf for additional storage. Below are key sections for safety, parts list, assembly instructions, usage, care, and warranty information.

1. Parts & Hardware Included 2. Safety Instructions 3. Assembly Instructions 4. Product Specifications 5. Usage & Features 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any item is missing.

Item No.DescriptionQuantity
1Table Top1
2Side Panel (Left)1
3Side Panel (Right)1
4Back Panel1
5Drawer Front (Large)2
6Drawer Bottom2
7Drawer Side4
8Shelf1
9Metal Drawer Runner Set2 pairs
-Cam Lock Nuts & Screws1 packet
-Wood Dowels8
-Allen Key1

Safety Instructions

Read all instructions before assembly and use.

  1. Assembly Surface: Assemble on a soft, clean surface (e.g., carpet or blanket) to prevent scratches.
  2. Adult Assembly: This product requires assembly by two adults. Keep children and pets away during assembly.
  3. Tool Use: Use only the provided Allen key. Do not overtighten screws.
  4. Stability: Ensure all parts are securely fastened. Do not stand or sit on the table.
  5. Weight Limit: The table top has a maximum load capacity of 25 kg (55 lbs). The shelf has a limit of 15 kg (33 lbs). Do not exceed.

WARNING! Failure to follow instructions may result in injury or product damage.

Assembly Instructions

Follow steps in order. Allow approximately 45-60 minutes for assembly.

  1. Prepare Parts: Lay out all parts and hardware. Identify pieces using the included diagram.
  2. Attach Back Panel: Insert wood dowels into side panels. Align back panel and secure with cam lock nuts.
  3. Install Shelf: Slide the shelf into the slots on the side panels. It should click into place.
  4. Attach Table Top: Place the table top onto the assembled frame. Secure from underneath using the provided screws.
  5. Assemble Drawers: Connect drawer sides to front and back using dowels and cam locks. Attach drawer bottom into grooves.
  6. Install Drawer Runners: Attach one part of the metal runner to the inside of the cabinet frame and the other to the drawer side. Test slide.
  7. Final Check: Ensure all screws and locks are tight. Wipe clean with a dry cloth.

Tip: Do not fully tighten cam locks until all parts are aligned.

Product Specifications

Usage & Features

Designed for multi-room storage with easy-access drawers.

Primary Features:

Recommended Use: Living room side table, bedroom nightstand, entryway console. Not for commercial or outdoor use.

Care & Maintenance

Proper care ensures longevity.

  1. Cleaning: Wipe with a soft, slightly damp cloth. Dry immediately. Do not use abrasive cleaners, scouring pads, or solvents.
  2. Drawer Maintenance: Occasionally clean drawer runners with a dry cloth to remove dust. Do not lubricate.
  3. Surface Protection: Use coasters under drinks and hot items to prevent marks and heat damage.
  4. Relocation: Empty drawers before moving the table. Lift, do not drag.

CAUTION! Avoid prolonged exposure to direct sunlight or high humidity to prevent warping or discoloration.

Troubleshooting

IssuePossible CauseSolution
Wobbly tableUneven floor; loose screwsCheck floor level. Tighten all cam locks and screws, especially those connecting legs to top.
Drawer sticks or is hard to openMisaligned runner; debris in trackRemove drawer, realign runner parts, and ensure they are securely fastened. Clean track.
Drawer front is unevenDrawer not fully seated on runnersOpen drawer fully, lift slightly, and push back in until it clicks into place.
Cam lock won't tightenDowel not fully inserted; cross-threadedDisassemble step, ensure dowel is fully in its hole, and re-engage cam lock.
Scratches on surfaceAssembly on hard surface; abrasive cleaningUse touch-up paint (available at IKEA). For prevention, assemble on soft surface and clean gently.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at IKEA stores.

  1. Visit the IKEA store where the product was purchased with your receipt.
  2. Contact IKEA Customer Support: Visit www.ikea.com for your local country's contact details.
  3. Have your article number (004.978.06) and receipt ready.

Recycling: At end of life, disassemble and recycle materials according to local regulations. Particleboard can often be recycled.

IKEA ÄNGESBYN 004.978.06 Storage Table instructions manual © - All Rights Reserved 2025