IKEA ÄDELLÖVTRÄD 805.301.66 Candle instructions manual

The IKEA ÄDELLÖVTRÄD 805.301.66 is a decorative pillar candle designed for ambient lighting. Made from paraffin wax with a cotton wick, it features a classic cylindrical shape suitable for various candle holders. Below are key sections for safety, features, usage, care, and troubleshooting.

1. Features at a Glance 2. Safety Instructions 3. First Use & Preparation 4. Specifications 5. Proper Burning Instructions 6. Placement & Environment 7. Extinguishing the Candle 8. Care & Maintenance 9. Troubleshooting 10. Disposal & Recycling

Features at a Glance

Key components: Paraffin wax body, Cotton wick, Standard pillar dimensions.

FeatureDescription
MaterialParaffin wax with cotton wick
DimensionsStandard pillar size (approx. 3" diameter x 6" height)
Burn TimeApproximately 40-50 hours (varies with conditions)
ColorClassic white (may vary by production batch)
FragranceUnscented (unless otherwise specified on packaging)
PackagingPlastic wrap for protection

Safety Instructions

Always follow these safety guidelines to prevent fire and injury.

  1. Never leave a burning candle unattended.
  2. Keep out of reach of children and pets.
  3. Place on a stable, heat-resistant surface away from drafts.
  4. Keep away from flammable materials (curtains, bedding, papers).
  5. Do not burn for more than 4 hours at a time.
  6. Trim wick to 1/4 inch before each use to prevent excessive flame.

WARNING! Fire hazard: Failure to follow instructions may cause fire, injury, or property damage. Always extinguish before leaving the room.

First Use & Preparation

Proper preparation ensures optimal burning and longevity.

  1. Remove all packaging materials from the candle.
  2. Place candle in an appropriate holder that collects dripping wax.
  3. Ensure the candle is on a level, stable surface.
  4. Trim wick to 1/4 inch using wick trimmer or scissors.
  5. Allow the first burn to create a full melt pool across the surface (approx. 2-3 hours).

CAUTION! Handle with care; wax may be brittle if cold.

Specifications

Proper Burning Instructions

Follow these steps for safe and efficient candle use.

  1. Always trim wick to 1/4 inch before lighting.
  2. Use long matches or a long-reach lighter to ignite.
  3. Allow candle to burn until wax melts evenly to the edges (prevents tunneling).
  4. Do not burn for more than 4 consecutive hours.
  5. Keep flame away from moving air (fans, open windows).
  6. Monitor flame height; it should be steady and not excessively high.

Tip: The first burn is crucial for an even wax pool and longer candle life.

Placement & Environment

Correct placement ensures safety and optimal performance.

  1. Place on a stable, non-flammable surface (ceramic, metal, glass).
  2. Keep at least 3 inches away from any other objects.
  3. Avoid drafty areas (near vents, doors, windows) to prevent uneven burning.
  4. Do not place in direct sunlight or near heat sources.
  5. Use in well-ventilated rooms but away from strong air currents.

Tip: A candle holder with a lip helps contain any wax drips.

Extinguishing the Candle

Always extinguish properly to ensure safety.

  1. Use a candle snuffer to gently extinguish the flame (prevants wax splatter).
  2. If no snuffer, blow gently across the flame until it goes out.
  3. Never use water to extinguish a candle wax fire.
  4. Ensure the wick is centered and upright after extinguishing.
  5. Do not move the candle until wax has fully solidified (approx. 2 hours).

WARNING! Hot wax can cause burns. Allow candle to cool completely before handling or moving.

Care & Maintenance

Regular care extends candle life and maintains appearance.

  1. Trim wick before each use to 1/4 inch to control flame size and soot.
  2. Remove any debris (wick trimmings, matches) from the wax pool before lighting.
  3. If candle develops a tunnel, wrap aluminum foil around top edges during burn to melt excess wax.
  4. Store unused candles in a cool, dry place away from direct sunlight.
  5. Clean holder regularly to remove wax buildup.

CAUTION! Never trim wick while candle is lit or wax is hot.

Troubleshooting

SymptomPossible CauseCorrective Action
Candle tunneling (wax doesn't melt to edges)First burn too short; drafty locationAllow longer burns; move away from drafts; use foil method to remelt edges.
Excessive smoke/sootWick too long; draftTrim wick to 1/4 inch; place in draft-free area.
Uneven burningDraft; uneven surfaceRelocate candle; ensure surface is level.
Flame too high/flickeringWick too long; draftExtinguish, trim wick, relight; move away from air currents.
Wax dripping excessivelyDraft; burning too longMove to still location; limit burn time to 4 hours.

Note: If problem persists, discontinue use and contact IKEA customer service.

Disposal & Recycling

Dispose of candle and packaging responsibly.

  1. Allow candle to burn completely or until 1/2 inch of wax remains at bottom.
  2. Extinguish and let wax cool completely.
  3. Remove any remaining wax from holder; wax can be disposed of in household trash.
  4. Recycle paper packaging according to local regulations.
  5. For product support, visit www.ikea.com or contact your local IKEA store.

Environmental Note: Paraffin wax is a petroleum byproduct; consider proper disposal to minimize environmental impact.

IKEA ÄDELLÖVTRÄD 805.301.66 Candle instructions manual © - All Rights Reserved 2025